Yamaha DSP-AX2 Owner's Manual

Yamaha DSP-AX2 Manual

Get Yamaha DSP-AX2 PDF manuals and user guides View all Yamaha DSP-AX2 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha DSP-AX2 manual content summary:

  • Yamaha DSP-AX2 | Owner's Manual - Page 1
    DSP-AX2 Natural Sound AV Amplifier Amplificateur Audio-Video NATURAL SOUND AV AMPLIFIER DSP-AX2 STANDBY /ON INPUT MODE INPUT VOLUME SPEAKERS DSP PROGRAM S VIDEO VIDEO L AUDIO R OPTICAL VIDEO AUX OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL
  • Yamaha DSP-AX2 | Owner's Manual - Page 2
    , please read this manual carefully. Keep it , as they may cause electrical shock to the user and/or damage to this unit. 6 Do this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet . For details, refer to the instructions described below. Note: The plug severed
  • Yamaha DSP-AX2 | Owner's Manual - Page 3
    30 SET MENU Items 31 Remote Control Features 40 Adjusting the Levels of the Effect Speakers 51 Setting the Sleep Timer 51 Additional Information 52 Digital Sound Field Processing (DSP 53 CINEMA-DSP ...55 DSP Parameter ...58 Appendix 62 Troubleshooting ...63 Specifications ...66 1
  • Yamaha DSP-AX2 | Owner's Manual - Page 4
    digital home entertainment. This unit is the most complete and advanced AV amplifier available. Though some of the more advanced features of this DSP) CINEMA-DSP: Dolby Digital + DSP and DTS + DSP Virtual CINEMA DSP and HP CINEMA DSP Multi-function remote control Built-in 8-channel power amplifier
  • Yamaha DSP-AX2 | Owner's Manual - Page 5
    for the TV Area. V655120 Quick Reference Guide Power Cord (Europe model only) Side panel remote control and the main unit, the sensor cannot receive signals. The sensor may not be able to receive remote control NATURAL SOUND AV AMPLIFIER DSP-AX2 STANDBY /ON INPUT MODE INPUT VOLUME SPEAKERS
  • Yamaha DSP-AX2 | Owner's Manual - Page 6
    controls behind the front panel door, close the door. To open the door, press gently on the lower part of the panel. 1 0q 4 23 MEMORY STEREO BASS P.DIRECT ZONE 2 SLEEP 7 98 1 2 5 63 4 5 NATURAL SOUND AV AMPLIFIER DSP-AX2 remote control. 2 Remote Control if the Main speakers are set to
  • Yamaha DSP-AX2 | Owner's Manual - Page 7
    speakers using EFFECT, all DTS and Dolby Digital audio signals are directed to the Main left and right channels except for the LFE channel. Controls OUT. y DSP PROGRAM selector Selects the DSP program. Display Indicators 1 Processor receiving a strong signal for an FM stereo broadcast. q MEMORY Flashes
  • Yamaha DSP-AX2 | Owner's Manual - Page 8
    Preparations Controls and Functions Rear panel 7 1 2 50 OPTICAL R L MD/TAPE R L TUNER e q8 CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. R L VOLTAGE SELECTOR R L CENTER R L R L IMPEDANCE SELECTOR SET BEFORE POWER ON FRONT : 6ΩMIN./SPEAKER REAR : 4ΩMIN./SPEAKER
  • Yamaha DSP-AX2 | Owner's Manual - Page 9
    while the remote control is sending DSP TEST Outputs the test tone to adjust the speaker levels. g Infrared window h LIGHT Turns the light on or off. When you press this button once, the light turns on for about ten seconds. Press again to turn off the light. j Cover k Å button Switches the control
  • Yamaha DSP-AX2 | Owner's Manual - Page 10
    an External Decoder 17 Connecting External Amplifiers 17 Others ...18 On-Screen Displays (OSD) 19 OSD Modes ...19 Selecting the OSD Mode 19 Speaker Placement 20 Speaker Settings 21 Speaker Output Levels 22 Before You Begin 22 Dolby Surround Test 22 DSP Test ...23 8 Appendix
  • Yamaha DSP-AX2 | Owner's Manual - Page 11
    these configurations to produce a fuller sound. Front Effect Speakers Rear Speakers Main Speakers Center Speaker Front Subwoofer Rear Center Speaker Rear Subwoofer ( ) s Eight or Seven Speaker Configuration -Full Cinema DSP- When you reproduce feature film software, this configuration fully
  • Yamaha DSP-AX2 | Owner's Manual - Page 12
    to terminals with the same number labels. Yamaha applies this labelling system to all its , use an inline boosting transformer or MC-head amplifier when connecting to these jacks. The GND terminal the recorded sound may be distorted. To avoid this problem, turn on this unit. • When you connect a
  • Yamaha DSP-AX2 | Owner's Manual - Page 13
    INPUT MD/TAPE recorder OUTPUT INPUT RL RL (General and China models) OUT (REC) OUT (REC) CENTER Turntable OUTPUT GROUND LR to/from External Amplifier to/from External Controller from External Decoder 11
  • Yamaha DSP-AX2 | Owner's Manual - Page 14
    available video cables when connecting to the COMPONENT VIDEO jacks. • When you are using the COMPONENT VIDEO jacks, check the details in the owner's manual that came with the component being connected. Preparations Basic Operation Advanced Operation Additional Information Appendix 12
  • Yamaha DSP-AX2 | Owner's Manual - Page 15
    Hookups English COMPONENT OPTICAL OUTPUT S VIDEO OUTPUT DVD player OUTPUT VIDEO AUDIO OUTPUT OUTPUT LR COMPONENT OUTPUT VIDEO OUTPUT S VIDEO AUDIO OUTPUT OUTPUT OPTICAL LR DTV/LD player RF OUTPUT
  • Yamaha DSP-AX2 | Owner's Manual - Page 16
    . 4 Insert only the exposed portion of the cable into the slot in the side of the terminal, and tighten the terminal knob. Note: • If your speaker cords have banana plugs, tighten the terminal knob and insert the plug into the end of the terminal. (Except for Europe and U.K. models) (Except for
  • Yamaha DSP-AX2 | Owner's Manual - Page 17
    English Hookups Right Rear Speaker Right Front Speaker Left Front Speaker Rear Center Speaker Left Rear Speaker CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. VOLTAGE SELECTOR IMPEDANCE SELECTOR SET BEFORE POWER ON FRONT : 6ΩMIN./SPEAKER REAR : 4ΩMIN./SPEAKER REAR CENTER : 4ΩMIN./
  • Yamaha DSP-AX2 | Owner's Manual - Page 18
    Right Rear Speaker Left Rear Speaker R L s Connecting a rear subwoofer By using both Front and Rear Subwoofers, the CINEMA-DSP sound field the Rear speakers to the Subwoofer with the correct polarity. Note: • Adjust the speaker volume for the Subwoofer with the controls on the Subwoofers
  • Yamaha DSP-AX2 | Owner's Manual - Page 19
    sound processor, or pre-amplifier. Connect the output remote control. Notes: • When you select 6CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot listen to DSP programs. • When you select 6CH INPUT as the input source, changing SPEAKER
  • Yamaha DSP-AX2 | Owner's Manual - Page 20
    SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER N./SPEAKER IN./SPEAKER AC OUTLETS (Lower position) FRONT EFFECT: The impedance of each speaker outlets is controlled by this unit's STANDBY/ON (SYSTEM POWER or STANDBY on the remote). These
  • Yamaha DSP-AX2 | Owner's Manual - Page 21
    DSP appear regardless of the OSD mode. Selecting the OSD Mode ON SCREEN 1 When you turn on the power, the video monitor and front panel display shows the level of the main volume for a few seconds and then switches to show the current sound field program. 2 Press ON SCREEN on the remote control
  • Yamaha DSP-AX2 | Owner's Manual - Page 22
    precise dialogue localization. When you use a projection screen with your system, the Front Effect speakers provide better effect quality. The CINEMA-DSP sound field programs raise the sound from the Center speaker upward and provide natural sound corresponding with the video images. Front Effect
  • Yamaha DSP-AX2 | Owner's Manual - Page 23
    SET items 1A through 1G Item Description Initial Setting 1A. CENTER SP Selects the Center channel output mode according to the size of the Center speaker. The possible settings are LRG (large), SML (small), and NONE. LRG 1B. MAIN SP Selects the Main channel output mode according to the size
  • Yamaha DSP-AX2 | Owner's Manual - Page 24
    explains how to set the speaker levels using the test tone. There are two tests; Dolby Surround test and DSP test. Before You Begin BASS TREBLE 1 Set BASS and TREBLE on the front panel to "0" (the center position) and turn off BASS EXTENSION. 2 Use the remote control for the next three steps
  • Yamaha DSP-AX2 | Owner's Manual - Page 25
    English RL DSP Test Speaker Output Levels 1 After the dsp test is selected, "TEST DSP" appears on the video monitor and in the front display. TEST DSP MAIN FL FR L CR RC RR TEST DSP EFFECT FRONT EFFECT FRONT LEVEL 0dB LEVEL 0dB 2 Adjust VOLUME +/- to hear the test tone. Make an
  • Yamaha DSP-AX2 | Owner's Manual - Page 26
    Introduction Preparations Basic Operation Basic Operation Advanced Operation Additional Information Appendix Basic Playback 25 Power Control ...25 Selecting a Source 26 Input Modes and Indications 27 Selecting a Sound Field Program 28 Basic Recording 29 Preparations ...29 24
  • Yamaha DSP-AX2 | Owner's Manual - Page 27
    are noted in the order of "button name (remote control button name)." STANDBY SYSTEM POWER Input buttons STANDBY/ON NATURAL SOUND AV AMPLIFIER DSP-AX2 STANDBY /ON EFFECT INPUT selector INPUT MODE VOLUME INPUT MODE INPUT VOLUME SPEAKERS A B SILENT BASS PROCESSOR EXTENSION DIRECT PHONES
  • Yamaha DSP-AX2 | Owner's Manual - Page 28
    1 VCR 2/DVR Video deck 2 or Digital Video Recorder V-AUX Other AV component PHONO Turntable CD CD player TUNER AM/FM tuner MD/TAPE MD component. • Refer to the operation instructions for the component. 3 Adjust VOLUME (or VOLUME +/- on the remote control). Caution: • If the power of
  • Yamaha DSP-AX2 | Owner's Manual - Page 29
    , you can set the priority of the input signal. Press INPUT MODE on the front panel or an input button (press it repeatedly) on the remote control to display or change the input mode. • AUTO AUTO:DOLBY D. AUTO This mode is automatically selected when you turn on the power of this unit
  • Yamaha DSP-AX2 | Owner's Manual - Page 30
    DSP program groups. 10KEY/DSP 1 Set 10KEY/DSP on the remote to DSP. 2 Press the DSP button on main unit and rotate the Multi jog knob to select the desired sound field program. 6.1/ES If you want to utilize the Rear Center speaker is played; - when using the test tone; or - when connecting the
  • Yamaha DSP-AX2 | Owner's Manual - Page 31
    to reproduce with the INPUT selector and adjust the volume. Notes: • Do a test recording before you start an actual recording. • When this unit's power is off Operating BASS and TREBLE, BASS EXTENSION, BALANCE, VOLUME, and DSP programs do not affect the recorded signal. s Special considerations when
  • Yamaha DSP-AX2 | Owner's Manual - Page 32
    Code in the Remote Control 45 Programming a New Remote Control Function 46 Using the Macro Feature 47 Changing the Source Name in the Display Window 49 Clearing a Learned Function or Macro 49 Clearing Learned Functions and Setups 50 Adjusting the Levels of the Effect Speakers 51 Setting the
  • Yamaha DSP-AX2 | Owner's Manual - Page 33
    YES / NONE Normal / -10dB 33-35 2. LOW FREQ. TEST Matches the Subwoofer level with the level of the other speakers. TEST TONE; 35 OFF / ON OUTPUT; MAIN L/R, MAIN L, / LAST 37 9. PARAMETER INI Initializes the parameters of a group of DSP programs. 1 to 12 37 10. DOLBY D. SET 10A. LFE
  • Yamaha DSP-AX2 | Owner's Manual - Page 34
    the SET MENU Adjustment should be performed with the remote control. Some items require extra steps to change to the SPEAKER SET ≥ 2 LOW FREQ.TEST 3 L/R BALANCE 4 HP TONE CTRL Front Panel Display 2 LOW FREQ.TEST -/+ : Enter 3 Press + or - to change the setting of the item. 2 LOW FREQ.TEST ≥ TEST
  • Yamaha DSP-AX2 | Owner's Manual - Page 35
    sound and images. The OSD shows a large, small, or no center speaker depending on how you set this item. The initial setting is "LRG". SP "LRG SML NONE s 1B. MAIN SP (Main Speaker Mode) The display shows small or large Main speakers depending on how you set this item. The initial setting is
  • Yamaha DSP-AX2 | Owner's Manual - Page 36
    LFE signals are directed to the Subwoofer. Select the "MAIN" setting if you do not use a Subwoofer. The LFE signals are directed to the Main speakers. Select the "BOTH" setting if you use a Subwoofer and you want to mix the Main channel low frequency sound signals with the LFE signals. Subwoofer
  • Yamaha DSP-AX2 | Owner's Manual - Page 37
    feature to adjust the Subwoofer volume so it matches the volume of the other speakers in your configuration. Change the setting using the remote control while sitting in the main listening position. 1 Press + or - to set the TEST TONE to "ON", and adjust the volume using VOLUME + so you can hear the
  • Yamaha DSP-AX2 | Owner's Manual - Page 38
    speakers. Initial setting is the neutral position. R 0 4. HP TONE CTRL (Headphone Tone Control) test tone remains at the Center speaker and you can hear how the sound changes as you adjust the various frequency levels. To turn off the test tone generator, press TEST repeatedly until the current DSP
  • Yamaha DSP-AX2 | Owner's Manual - Page 39
    , all of the parameter values within that group revert to their initial settings. Press the DSP program group button on the remote control for the DSP program you want to initialize. • All of the DSP programs within the selected program group are initialized. Repeat this step to initialize other
  • Yamaha DSP-AX2 | Owner's Manual - Page 40
    to sources at extremely low volume levels. 11. DTS SET 11 LFE LEVEL ≥ SPEAKER 0dB HEADPHONE............0dB 11 LFE LEVEL SP 0dB s 11. LFE LEVEL Use this feature " if you want to control the mode manually by pressing 6.1/ES on the remote. Basic Operation Advanced Operation Additional Information
  • Yamaha DSP-AX2 | Owner's Manual - Page 41
    right Main speaker, and the left and right Rear speakers to the listening position. Adjusting the delay time for the Center speaker is especially GUARD to protect the following features: • DSP program parameters • All SET MENU items • Front, Rear Center speaker and Subwoofer levels • The On-Screen
  • Yamaha DSP-AX2 | Owner's Manual - Page 42
    Introduction Preparations Basic Operation Remote Control Features The remote control can operate not only the main unit but also other Yamaha and other manufactures' audio and video components by using the Learning function and other manufactures' code settings. The Macro feature also improves
  • Yamaha DSP-AX2 | Owner's Manual - Page 43
    another component independently from the input you selected by pressing an input button. 1 Press SOURCE SELECT h or g to choose a component and set the remote control to be used for it. 2 The display window will show one of the following: V-AUX, TAPE, PHONO, TUNER, MD, CD, VCR 1, VCR 2, DVD
  • Yamaha DSP-AX2 | Owner's Manual - Page 44
    have set up the manufacturer code for the TV Area. *1 When operating a Tape Deck, set the manufacturer code for TAPE before using the remote control. INDEX (Set 10KEY) REC/PAUSE POWER DISPLAY SEARCH SOUND Skip Search STOP PLAY PAUSE Numeric buttons 1 to 9 Numeric button +10 Numeric button 0 TV
  • Yamaha DSP-AX2 | Owner's Manual - Page 45
    (Set 10KEY) TV INPUT TV MUTE TV VOL +/- *3 Set the manufacturer code for TV before using the remote control. When operating a LD player, set the manufacturer code for LD before using the remote control. When LD is selected, TV cannot be operated. Set TV code in PHONO button if necessary. Rewind
  • Yamaha DSP-AX2 | Owner's Manual - Page 46
    up the manufacturer code for the TV Area. *5 Set the manufacturer code for Cable TV Tuner and Satellite Tuner before using the remote control. POWER DISPLAY SEARCH SOUND CHAPTER +/- (Chapter Search) STOP PLAY PAUSE Numeric buttons 1 to 9 CLEAR Numeric button +10 Numeric button 0 Chapter/Time (Set
  • Yamaha DSP-AX2 | Owner's Manual - Page 47
    . If the component cannot be controlled by the remote control, try entering another code for AMP. * L:AMP has four codes; YPC, DSP, NO, and Zone2. "YPC" should be selected to operate this unit. "DSP" is for operating Yamaha DSP amplifiers other than this unit. "NO" is to clear the main unit control
  • Yamaha DSP-AX2 | Owner's Manual - Page 48
    some special signals or extremely long transmissions. (Refer to the operation instructions for the other remote control.) When the memory is full, "FULL" appears in the display window, and this remote control cannot acquire any more functions. Clear unnecessary programmed functions to allow the
  • Yamaha DSP-AX2 | Owner's Manual - Page 49
    English Using the Macro Feature Remote Control Features The Macro feature makes it possible to perform a TV turns off. *3 The components for which playback can be started are any YAMAHA remote control-compatible MD recorders, CD players, CD recorders, and DVD players. When using macros to operate
  • Yamaha DSP-AX2 | Owner's Manual - Page 50
    OFF. • While the main unit is carrying out a macro program, the main unit does not receive any other button's function until the macro is complete (the TRANSMIT indicator stops flashing). • Continue to aim the remote control at the component the macro is operating until the macro program is complete
  • Yamaha DSP-AX2 | Owner's Manual - Page 51
    English Changing the Source Name in the Display Window Remote Control Features 1 Select the source component you want to rename by using the input buttons. RE-NAME 2 Press RE-NAME using a ballpoint pen or similar object. 3
  • Yamaha DSP-AX2 | Owner's Manual - Page 52
    the button reverts to its factory preset function or macro. Notes: • If the remote control is without batteries for more than twenty minutes, or if worn out batteries remain in and when one of MACRO ON/OFF, 10KEY/DSP, PARAMETER/SET MENU is switched to another position. Basic Operation Advanced
  • Yamaha DSP-AX2 | Owner's Manual - Page 53
    speaker volume level using the + or - on the remote control. You can adjust the Center, Right Rear, Rear Center, Left Rear, Front Effect speakers right speakers independently. • When you adjust the speaker level using LEVEL, the settings you made using the Dolby Surround Test and DSP Test change.
  • Yamaha DSP-AX2 | Owner's Manual - Page 54
    Advanced Operation Additional Information Appendix Digital Sound Field Processing (DSP) 53 Understanding Sound Fields 53 Hi-Fi DSP Programs 54 CINEMA-DSP 55 Sound Design of CINEMA-DSP 55 CINEMA-DSP Programs 56 DSP Parameter 58 Changing Parameter Settings 58 Parameter Descriptions 58
  • Yamaha DSP-AX2 | Owner's Manual - Page 55
    room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. Yamaha's DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output
  • Yamaha DSP-AX2 | Owner's Manual - Page 56
    Introduction Preparations Basic Operation Digital Sound Field Processing (DSP) Hi-Fi DSP Programs Concert Hall 1 s Europe Hall A This is a from the rear as well. The number of speakers to output depends on SPEAKER SET in SET MENU. Advanced Operation Additional Information Appendix 54
  • Yamaha DSP-AX2 | Owner's Manual - Page 57
    for that signal. L SURROUND SOUND FIELD AV ROOM PRESENCE SOUND FIELD DIALOG EFFECT MUSIC R speakers to recreate the realistic sound of a Dolby Stereo theater. Surround DSP sound field Presence DSP sound field Dolby Digital/DTS + DSP sound field effect These programs use Yamaha's tri-field DSP
  • Yamaha DSP-AX2 | Owner's Manual - Page 58
    input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern. Table of Program Names for Each Input encoded with DTS. Note: • No sound will be output from the Main speakers when a monaural source is played with sound field Program Groups 7 (Game) and
  • Yamaha DSP-AX2 | Owner's Manual - Page 59
    sound positioning smoother and more precise. In this program, no DSP effect is applied. CINEMA-DSP Program Group 7 s Pop/Rock Program Group 8 This ES Program Group 12 This program ideally simulates the multiple surround speaker systems of 35 mm film theaters. The Dolby Surround decoding and
  • Yamaha DSP-AX2 | Owner's Manual - Page 60
    Introduction Preparations Basic Operation DSP Parameter You can enjoy good quality sound with the .TIME............1.6s REV.DELAY......100ms REV.LEVEL 7% 1 Set PARAMETER/SET MENU to PARAMETER on the remote control. 2 Turn on your video monitor and press ON SCREEN to select the full display. 3
  • Yamaha DSP-AX2 | Owner's Manual - Page 61
    SIZE [P. ROOM SIZE for the presence sound field] DSP Parameter Control Range 0.1 - 2.0 Function This parameter adjusts the longer the time between the original reflected sound and the subsequent reflections. By controlling the time between the reflected sounds, you can change the apparent size of
  • Yamaha DSP-AX2 | Owner's Manual - Page 62
    Introduction Preparations Basic Operation DSP Parameter S. LIVENESS (Surround Liveness) Control Range 0 -10 Function This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field. RC. INIT. DLY (Rear Center Initial Delay) Control Range 1 - 49 msec
  • Yamaha DSP-AX2 | Owner's Manual - Page 63
    adjusts the volume of the reverberation sound. Description ......... The larger the value, the stronger the reverberation becomes. Sound Source DSP Parameter Control Range 0 - 100 % Level REV. LEVEL Time CT. DELAY (Center Delay) Function These parameters adjust the sound delay for each
  • Yamaha DSP-AX2 | Owner's Manual - Page 64
    62 66 Specifications 63 Troubleshooting Appendix Additional Information Appendix Advanced Operation Basic Operation Preparations Introduction
  • Yamaha DSP-AX2 | Owner's Manual - Page 65
    Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn the power off, disconnect the power cord, and contact your dealer or the nearest Yamaha Audio Products Service
  • Yamaha DSP-AX2 | Owner's Manual - Page 66
    Introduction Preparations Basic Operation Troubleshooting Problem Possible Cause What to Do No sound is coming from the Front Effect speakers. PRO LOGIC/Normal, DOLBY DIGITAL/ Select another sound field program. Normal or DTS DIGITAL SUR./Normal of DSP program 12 is selected. The front
  • Yamaha DSP-AX2 | Owner's Manual - Page 67
    The remote control does not work. The remote control does not function properly. The remote control does not "learn" new functions. (The TRANSMIT indicator does not light up or flash.) Continuous functions such as volume are learned, but operate only for a moment before stopping. Troubleshooting
  • Yamaha DSP-AX2 | Owner's Manual - Page 68
    W maximum 3 (Switched) [U.K. model 1 (Switched) Dimension (W x H x D 449 x 191 x 468 mm (17-5/8" x 7-1/2" x 18-7/16") Weight 22 kg (48.5 lbs) Accessories Remote Control Batteries Quick Reference Guide Side Panel Sticker [Europe model Power Cord * Specifications are subject to change without
  • Yamaha DSP-AX2 | Owner's Manual - Page 69
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • Yamaha DSP-AX2 | Owner's Manual - Page 70
    Quick Reference Card s Remote Control s TUNER button (TUNER area) s CD button (CD area) CLEAR RE-NAME TRANSMIT STANDBY SYSTEM POWER Display Source selector LIGHT Operational buttons 10 KEY/DSP Operational buttons LEVEL ON SCREEN SLEEP TEST Infrared window LEARN MACRO MACRO ON/OFF A button Input
  • Yamaha DSP-AX2 | Owner's Manual - Page 71
    you have set up the manufacturer code for the TV Area. DISPLAY You can control your VCR, if you have set up the code for VCR1. POWER Numeric the manufacturer code for the TV Area. DISPLAY MENU Menu cursor/ENTER You can control your VCR, if you have set up the code for VCR1. POWER Numeric buttons
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
DSP-AX2
Natural Sound AV Amplifier
Amplificateur Audio-Video
GB
STANDBY
/ON
NATURAL SOUND
AV
AMPLIFIER
DSP-AX2
INPUT MODE
INPUT
VOLUME
SILENT
PHONES
SPEAKERS
B
A
PROCESSOR
DIRECT
BASS
EXTENSION
BASS
TREBLE
REC OUT
DSP PROGRAM
VIDEO AUX
VCR 1
SAT
CABLE
D-TV/LD
DVD
SOURCE
MD/TAPE
CD-R
TUNER
CD
PHONO
VCR 2/DVR
EFFECT
6CH
INPUT
S VIDEO
VIDEO
L
R
OPTICAL
AUDIO
VIDEO AUX
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING