Yamaha DSP-Z7 DSP-Z7 Firmware Update ver. 1.23_Installation_Manual
Yamaha DSP-Z7 Manual
View all Yamaha DSP-Z7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha DSP-Z7 manual content summary:
- Yamaha DSP-Z7 | DSP-Z7 Firmware Update ver. 1.23_Installation_Manual - Page 1
Firmware Update Procedure for DSP-Z7 IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not - Yamaha DSP-Z7 | DSP-Z7 Firmware Update ver. 1.23_Installation_Manual - Page 2
Firmware Update Procedure for DSP-Z7 Firmware Update by USB Requirement: (Formatting by FAT system is required in advance). - USB flash drive, with enough free space to hold over 16 MB. - Firmware file provided by YAMAHA,"RXZ7-xxxx.bin". Step1: Delete any existing files in the USB flash drive. Step2 - Yamaha DSP-Z7 | DSP-Z7 Firmware Update ver. 1.23_Installation_Manual - Page 3
power or remove the USB flash drive during the update. In case the power is accidentally cut off, refer to troubleshooting procedures on page 6 to recover. Step7 When "UPDATE OK" appers on the display, firmware update is completed. The receiver automatically powers off and on again in the normal - Yamaha DSP-Z7 | DSP-Z7 Firmware Update ver. 1.23_Installation_Manual - Page 4
Firmware Update Procedure for DSP-Z7 Firmware Update Through the Internet Requirement: Network environment to be able to connect to the Internet via RX-Z7. (For more information, refer to the owner's manual update. When "UPDATE OK" appers on the display, firmware update is completed. The receiver - Yamaha DSP-Z7 | DSP-Z7 Firmware Update ver. 1.23_Installation_Manual - Page 5
Firmware Update Procedure for DSP-Z7 Troubleshooting Case #1: Instead of "UPDATE OK", an error message appeared on the display during updating or "ERROR" appeared when confirming the firmware version in Advanced Setup. To recover, retry the update procedure of USB/Network from step1 again. In
Firmware Update Procedure for DSP-Z7
Page.1 of
5
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest firmware.
9
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
9
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
on the last page.