Yamaha M7CL M7cl V1.10 Supplementary Manual

M7CL firmware V1.10 contains the following changes and additions relative to

V1.05. (Changes in V1.06 are also included here.)

* The Help function in V1.10 and later of this product uses bitmap fonts from the Ricoh Corporation.

•

Speed of synchronization with M7CL Editor has been

improved.

•

In the ATT/HPF/EQ popup window (1ch) and the

DYNAMICS popup window (1ch), the location of the

ON button has been distanced from the “

×

” (close) but-

ton in order to prevent accidental operation.

•

By pressing a GEQ fader in the GEQ popup window,

you can now switch the faders assigned to the Central-

ogic section. The numbers of the assigned faders are

shown on the GEQ faders.

•

The position of the window has been improved so that

the channel number and channel name field at the bot-

tom of the display can be seen even when a popup win-

dow or the SCENE LIST window is displayed.

•

When you use the SAVE/LOAD screen to save all of the

M7CL’s internal data (except for user authentication key

data) in a single operation, the user level, user-defined

keys, and preference settings of the administrator and

guest will also be saved. On the M7CL console, this

data can be loaded only when the administrator logs in.

In M7CL Editor (V2.1.1 or later), this data can be read

at any time. However on earlier versions of the M7CL

console or M7CL Editor, this data that was saved in

V1.10 or later cannot be read.

•

You can now view the M7CL’s Help by pressing the

(Help) button in the function access area. For

details, refer to “Using the Help function.”

•

The assigned user-defined key will now blink while

you’re viewing a screen or popup window that’s book-

marked by a user-defined key.

•

You can now reset the GAIN to the default value (0.0

dB) for each band by simultaneously pressing the

SELECTED CHANNEL section EQ [Q] encoder and

EQ [GAIN] encoder.

•

The following have been added as parameters that can

be assigned to the user-defined keys.

•

PRE FADER (immediately before the fader) has been

added as a position for direct output from an INPUT

channel.

•

If you’re using the M7CL V1.10, you must use V2.1.1

or later of M7CL Editor. You can download the most

recent version of M7CL Editor from the following web-

site.

http://www.yamahaproaudio.com/

M7CL V1.10 Supplementary Manual

Changes in V1.06

Changes in V1.10

FUNCTION

PARAME-

TER 1

PARAME-

TER 2

Description

SET BY

SEL

SET

[INSERT

ON]

—

By holding down this key

and pressing the [SEL] key

of a channel, that chan-

nel’s INSERT ON can be

switched on/off.

SET BY

SEL

SET

[DIRECT

OUT ON]

—

By holding down this key

and pressing the [SEL] key

of a channel, that chan-

nel’s DIRECT OUT ON

can be switched on/off.

HELP

—

—

Opens or closes the HELP

popup window. If you hold

down this key and operate

a panel controller (except

for the faders) or an on-

screen controller, the cor-

responding explanation

will appear.

EN

Yamaha M7CL M7cl V1.10 Supplementary Manual

Yamaha M7CL Manual

Yamaha M7CL manual content summary: