Yamaha V4.1 CL/QL Series and CL/QL Editor V4.1 Supplementary Manual
Yamaha V4.1 Manual
 |
View all Yamaha V4.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha V4.1 manual content summary:
- Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 1
and QL5/ QL1 firmware V4.1. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 V4 Owner's Manual and Reference Manual. CL/QL Editor V4.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL/QL Editor V4.1. NOTE • The explanations in - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 2
audio networking interoperability 17 I/O DEVICE window (I/O page 18 Setup 18 Added supported devices 18 Dante Device Lock 20 Added functions in the NETWORK window 21 Alert message display 22 CL/QL Editor V4.1 Supplementary Manual 23 Reading and Writing CSV files 23 Added option for writing - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 3
for details on supported versions. http://www.yamahaproaudio.com/global/en/ Configure the network settings for each device. Shure devices: Configure the network settings using the Shure "Wireless Workbench 6" software or in the menu on each device. For details, refer to the manual of your Shure - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 4
for Shure AXT400, QLXD4 and ULXD4 DEVICE SELECT window (when SUPPORTED DEVICE is displayed) 1 NOTE If a device has the DEVICE IDENTIFY function, the DEVICE IDENTIFY button is enabled. is not possible. Mount it when online (make sure the DEVICE LIST button is on). 4 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 5
Indicates the mute status (on/off) of the audio signal for the receiver. Support for Shure AXT400, QLXD4 and ULXD4 9 RF (Radio Frequency) signal meter Shows bars and the actual strength of the RF signal, refer to the manual from Shure. 0 Battery indicator Shows bars to indicate the remaining - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 6
/ QL series consoles). 4 TX.GAIN Indicates the gain value for the transmitter. Support for Shure AXT400, QLXD4 and ULXD4 5 Channel name (receiver) Press this button and the actual strength of the RF signal, refer to the manual from Shure. 0 Battery indicator Shows bars to indicate the remaining - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 7
button to open the PORT SELECT window. Select the port to which the output from the AXT400 is connected (OMNI 1). Access the GAIN/PATCH window. Support for Shure AXT400, QLXD4 and ULXD4 Press the INPUT PORT button, and on the PORT SELECT window select the port to which the output signal - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 8
"Remotely controlling WIRELESS unit" in the CL series or QL series Reference Manual. For QLXD4, the PORT ASSIGN tabs have been added. The MUTE window (1ch) For Shure AXT400 / QLXD4/ULXD4 12 34 5 6 Support for Shure AXT400, QLXD4 and ULXD4 1 Frequency Indicates the frequency that is currently - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 9
(8ch) For Shure AXT400 / QLXD4/ULXD4 1 2 3 4 5 Support for Shure AXT400, QLXD4 and ULXD4 4 RF (Radio Frequency) signal meter the number of bars and the actual strength of the RF signal, refer to the manual from Shure. 5 Battery indicator Shows bars to indicate the remaining battery power. NOTE For - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 10
between the number of bars and maximum operation time, refer to the manual from Shure. 4 OL indicator This will light if the audio signal MUTE indicator is displayed. SELECTED CHANNEL window For Shure AXT400 / QLXD4/ULXD4 Support for Shure AXT400, QLXD4 and ULXD4 1 4 23 1 TX.GAIN knob (for - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 11
Selected Channel section (QL series only) 4-band EQ band selection Selections of the EQ [LOW] key/EQ [LOW-MID] key/EQ [HIGH-MID] key/EQ [HIGH] key on the top panel and band selections on the touch screen are now linked. Selected Channel section (QL series only) 11 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 12
button • SURROUND MONITOR button • SLOT button • SEL CH button • SEND MASTER button • OMNI button • INPUT button(QL only) Input and output patching 12 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 13
Input/Output channels Input/Output channels Color name display In the PATCH/NAME window (when the ICON tab is selected), color names are now displayed on the channel color select buttons. 13 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 14
selected EQ type. Multiple selections are possible. If you select 8BandPEQ, the selected EQ type will be set as the default setting. 14 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 15
to shelving type. • When set to shelving type (Q=10.0), press in and turn the Q knob to the left to switch to PEQ. 15 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 16
. NOTE The settings for the PEAD HOLD button, RTA button, and offset gain are stored even when the console is turned off. 1 16 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 17
. This allows the CL/QL console and R series to establish an audio connection with audio networks that support AES67, such as "Ravenna." NOTE • The Audinate "Dante Controller" software is required to use the following message will appear at the bottom of the LCD screen. 17 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 18
-D, the display will appear as shown below. 1 2 Setup Setup Added supported devices The following devices are now supported: Audinate Dante-MY16-AUD2; d&b audiotechnik DS10; Shure AXT400, QLXD4, and sampling rate converter function is disabled, "SLOT" is displayed. 18 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 19
Setup 19 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 20
Device Lock The CL/QL console and R series now support Dante Device Lock. Its status is displayed on CL/QL "Initializing the console settings and Dante audio network settings" on CL or QL series's Reference Manual. • USB memory cannot be used to update the Dante module firmware. In addition, Dante - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 21
connector on the rear panel to remote-control external devices. DHCP, AUTO IP, and fixed IP settings are supported. Even on DHCP networks, it is now possible to remotely control external devices such as Tio1608-D and Shure's the window will appear as shown below. 21 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 22
that does not function at a speed of 1000Mbps? • Are you using a cable that does not support 1000BASE-T? Dante audio network settings Added error messages [SYSTEM] indicators Lit Lit Meaning You changed the , and set them to accommodate the current situation. 22 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 23
] check box, data that is not omitted from the comment line (line 3) is added and output to the CSV file. CL/QL Editor V4.1 Supplementary Manual Added specifications for the CSV file read function The number of synonyms and abbreviations that can be used when creating a CSV file have been increased - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 24
(Treated as Blank if there is no notation.) NOTE • This notation is not case sensitive. • Spaces within the notation are not recognized. 24 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 25
[n] Cascade Matrix [n] Cascade Stereo Left Cascade Stereo Right Cascade Mono (C) Cascade Cue Left Cascade Cue Right Cascade Cue B Left Cascade Cue B Right 25 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 26
will not be recognized if a space is added in the middle of a word. Support for devices that do not feature Dante output Support for devices that do not feature Dante output Devices that do not feature Dante output is on and not connected via a ShowLink® remote control 26 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 27
QLXD4 and ULXD4 display The RF channel (A or B) display has the same design as for the AXT400. Support for devices that do not feature Dante output Overview window (INPUT CH window) The HA display appears as (A or B) display has the same design as for the AXT400. 27 V4.1 Supplementary Manual - Yamaha V4.1 | CL/QL Series and CL/QL Editor V4.1 Supplementary Manual - Page 28
Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Group © 2016 Yamaha Corporation Published 12/2016 MA-A0
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
EN
CL/QL series V4.1 Supplementary Manual
This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/
QL1 firmware V4.1.
Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 V4 Owner’s Manual and Reference Manual.
CL/QL Editor V4.1 Supplementary Manual
This supplementary manual explains mainly the functions that have been added or changed in CL/QL Editor V4.1.
NOTE
•
The explanations in this supplementary manual will use the CL5.
•
In the case of the CL3/CL1 or QL5/QL1, some screens will not show channels and faders that do not exist on those models.