Zanussi ZW84PCBI User Manual
Zanussi ZW84PCBI Manual
 |
View all Zanussi ZW84PCBI manuals
Add to My Manuals
Save this manual to your list of manuals |
Zanussi ZW84PCBI manual content summary:
- Zanussi ZW84PCBI | User Manual - Page 1
User Manual GETTING STARTED? EASY. ZW84PCBI EN User Manual Washing Machine - Zanussi ZW84PCBI | User Manual - Page 2
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries - Zanussi ZW84PCBI | User Manual - Page 3
covering. • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised - Zanussi ZW84PCBI | User Manual - Page 4
extension hose if the inlet hose is too short. Contact the Authorised Service Centre for the replacement of the inlet hose. • When unpacking the shock, fire, burns or damage to the appliance. • Follow the safety instructions on the detergent packaging. • Do not put flammable products or items that - Zanussi ZW84PCBI | User Manual - Page 5
all metal objects are removed from the laundry. SERVICE • To repair the appliance contact the Authorised Service Centre. Use original spare parts only. • Please (WEEE). APPLIANCE OVERVIEW 12 3 10 11 12 1 Hinge supports 2 Detergent dispenser 3 Control panel 4 5 6 7 8 9 4 Magnetic plate - Zanussi ZW84PCBI | User Manual - Page 6
7 Plate with rubber beater 8 Drain pump filter 9 Front feet for levelling the appliance 10 Drain hose A B Mod. xxxxxxxxx Prod.No. 910000000 00 C 000V ~ 00Hz 0000 W D 00A 00000000 11 Mains cable 12 Inlet hose connection 13 Back feet for levelling the appliance The rating plate reports the - Zanussi ZW84PCBI | User Manual - Page 7
THE APPLIANCE IS EQUIPPED WITH ... A BC DE x4 x2 x1 x1 x1 F G H L x1 x2 x1 x1 UNPACKING WARNING! Use the gloves. x1 x2 WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the floor under the - Zanussi ZW84PCBI | User Manual - Page 8
hose holders and plastic spacers by using the spanner supplied with the appliance. 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in low- F er holes. G We recommend that you keep the packaging and - Zanussi ZW84PCBI | User Manual - Page 9
If possible, install the appliance where the floor is more stable. POSITIONING AND LEVELLING x4 1. Install the appliance on a flat hard floor. WARNING! Make sure that carpets do not stop the air circulation below the appliance. Bring the appliance near the furniture recess before levelling it. For - Zanussi ZW84PCBI | User Manual - Page 10
from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement. Water drainage The drain hose can be connected: 10 - Zanussi ZW84PCBI | User Manual - Page 11
pipe in the room wall and L tighten it with the supplied cable tie L. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. BUILDING IN min.600 mm This appliance has been designed to be built into the kitchen - Zanussi ZW84PCBI | User Manual - Page 12
596 mm 553 mm 50 mm 819 mm 50 mm 140 mm 76 mm If hoses run behind the appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum. Attach it on the top of the - Zanussi ZW84PCBI | User Manual - Page 13
1. Remove the screws of the top cover on the rear of the appliance and install the anti-tilting device as shown in the drawing. ~10mm 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen the nut counterclockwise with a 3mm wrench. Adjust the height and turn the - Zanussi ZW84PCBI | User Manual - Page 14
appliance is built in completely. If the cupboard door has to be opened from left to N right, invert the position of the hinge supports M with the magnetic plate N and lower plate O. M O M N O y x y Make sure that the plate with magnet is on the upper position. Cupboard door preparation For - Zanussi ZW84PCBI | User Manual - Page 15
door is parallel with the appliance edge and to respect the proper opening angle (max. 105 °). Mounting the door Fix the hinges to the hinge supports on the appliance by means of the two supplied screws B. The hinges can be adjusted to compensate for possible uneven thickness of the door. 15 - Zanussi ZW84PCBI | User Manual - Page 16
cable must be easily accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution - Zanussi ZW84PCBI | User Manual - Page 17
CONTROL PANEL CONTROL PANEL DESCRIPTION 1 Eco 40-60 2 34 5 11 10 9 8 76 The child lock option is set by holding pressed the relative button for at least 3 seconds. 1 Programme dial 2 Display 3 Delay Start touch button 4 Flextime touch button 5 Start/Pause touch button 6 Stains touch button - Zanussi ZW84PCBI | User Manual - Page 18
Door locked indicator. Delay start indicator. The digital indicator can show: • Reset position ( ). • Programme duration (e. g. ). • Delay time (e. g. ). • Cycle end ( ). • Warning code (e.g. ). • Error indicator ( ). • Indication of total operating hours of the appliance. Refer to the - Zanussi ZW84PCBI | User Manual - Page 19
By means of this button, you can change the default spin speed or set one of the additional spin options: • Rinse Hold . The related indicator comes on. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends - Zanussi ZW84PCBI | User Manual - Page 20
button, the appliance begins the countdown and the door is locked. FLEXTIME With this option you can reduce the programme duration depending on the load size and the degree of soiling. When you set a washing programme, the display shows the default duration and dashes. Touch Flextime button to - Zanussi ZW84PCBI | User Manual - Page 21
Programme Default temperature Temperature range Reference spin speed (rpm) Maximum load Programme description (Type of load and level of soiling) Spin/Drain Rinse Machine Clean 60 °C 1400 rpm 1400 rpm 1200 rpm 8.0 kg 8.0 kg - All fabrics, except woollens and delicate fabrics. To spin the - Zanussi ZW84PCBI | User Manual - Page 22
Programme Default temperature Temperature range Reference spin speed (rpm) Maximum load Programme description (Type of load and level of soiling) Wool/Handwash 40 °C 40 °C - Cold 1200 rpm 1.5 kg Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol3). 1) - Zanussi ZW84PCBI | User Manual - Page 23
Spin Rinse Hold No spin Night Extra Rinse Prewash Stains 1) Delay Start Flextime Programme Machine Clean ■ ■ Duvet ■ ■ 20min 3kg ■ ■ ■ ■ Sport ■ ■ ■ ■ ■ ■ Denim ■ ■ Wool/ Handwash ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) This option is not available with temperature lower than 40 °C. - Zanussi ZW84PCBI | User Manual - Page 24
SETTINGS ACOUSTIC SIGNALS This appliance has different acoustic signals, that operate when: • You activate the appliance (special short tune). • You deactivate the appliance (special short tune). • You touch the buttons (click sound). • You make an invalid selection (3 short sounds). • The - Zanussi ZW84PCBI | User Manual - Page 25
other liquid treatments(fabric conditioner, starch). - Maximum level for quantity of liquid additives. - Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level - Zanussi ZW84PCBI | User Manual - Page 26
SETTING A PROGRAMME 1. Turn the programme dial to select the desired washing programme. The first programme on the top right of the programme dial is Eco 40-60, the programme to which the information of the energy label relates. The indicator of the Start/Pause button flashes. The display shows an - Zanussi ZW84PCBI | User Manual - Page 27
The AutoAdjust detection is carried out with complete washing programmes only and if the programme duration has not been reduced by means of the Flextime button. The AutoAjust System is not available with all programmes such as :Wool/ Handwash, Rinse and programmes with short cycles. INTERRUPTING - Zanussi ZW84PCBI | User Manual - Page 28
, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not pillowcase. • A very small load can cause balance problems with the spin phase leading to excessive vibration. (refer to "Daily Use" chapter); b. manually redistribute the load so that the items are spaced - Zanussi ZW84PCBI | User Manual - Page 29
cottons, etc), the colour of clothes, size of the load, degree of soiling, wash temperature and hardness of the water used. • Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level ( ). • Do not mix different types of - Zanussi ZW84PCBI | User Manual - Page 30
the valve filter" paragraphs. If necessary, please contact the Authorised Service Centre. EXTERNAL CLEANING Clean the appliance with mild soap and warm cream cleanser agent without scratching the seal surface. Always obey the instructions that you find on the packaging of the product. Check and - Zanussi ZW84PCBI | User Manual - Page 31
the drum with special products for stainless steel. Always follow the instructions that you find on the packaging of the product. Do not a small brush to clean the recess. 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. - Zanussi ZW84PCBI | User Manual - Page 32
Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code . Proceed as follows to clean the pump: WARNING! • Do not remove the filter while the - Zanussi ZW84PCBI | User Manual - Page 33
that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 2 9. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter cor- 1 rectly to prevent leakages - Zanussi ZW84PCBI | User Manual - Page 34
2 1 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water. CLEANING THE INLET HOSE AND THE VALVE - Zanussi ZW84PCBI | User Manual - Page 35
When the drain pump is empty, install the inlet hose again. TROUBLESHOOTING WARNING! Make sure that the temperature is higher than 0 °C Start/Pause button until the indicator stops flashing (see the picture below). Problem The appliance does not fill with water properly. Possible solution • Make - Zanussi ZW84PCBI | User Manual - Page 36
appears again, contact the Authorised Service Centre. • Wait until mains supply is may be positioned too low. Refer to "Installation instruction". • Set the spin programme. • Make sure that manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. - Zanussi ZW84PCBI | User Manual - Page 37
according the indications given in this user manual. After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate. EMERGENCY - Zanussi ZW84PCBI | User Manual - Page 38
to 'Product description' chapter for the position of the rating plate. Keep the energy labels for reference together with the user manual and all other documents provided with this appliance. LEGEND kg kWh Litres % Laundry load. hh:m m Programme duration. Energy consumption. °C Temperature - Zanussi ZW84PCBI | User Manual - Page 39
ACCORDING TO UK ECODESIGN FOR ENERGY-RELATED PRODUCTS AND ENERGY INFORMATION REGULATIONS AND TO EU ECODESIGN REGULATION 2019/2023 AND THE EU ENERGY LABEL REGULATION 2019/2014 Eco 40-60 programme kg kWh Litres hh:mm Full load 8.0 Half load 4.0 Quarter load 2.0 1) Maximum spin speed. 0.800 - Zanussi ZW84PCBI | User Manual - Page 40
Programme kg kWh Litres hh:mm % Wool 30°C 1.5 0.200 55.0 01:05 30.00 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for - Zanussi ZW84PCBI | User Manual - Page 41
- Zanussi ZW84PCBI | User Manual - Page 42
- Zanussi ZW84PCBI | User Manual - Page 43
- Zanussi ZW84PCBI | User Manual - Page 44
157065431-A-182023 WWW.ZANUSSI.COM/SHOP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
GETTING
STARTED?
EASY.
User Manual
ZW84PCBI
EN
User Manual
Washing Machine