ZyXEL LTE7480-S905 User Guide

ZyXEL LTE7480-S905 Manual

Get ZyXEL LTE7480-S905 PDF manuals and user guides View all ZyXEL LTE7480-S905 manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL LTE7480-S905 manual content summary:

  • ZyXEL LTE7480-S905 | User Guide - Page 1
    User's Guide LTE7461-M602 & LTE7480-S905 Default Login Details LAN IP Address Login Password http://192.168.1.1 admin See the Zyxel Device label Version 2.00 Ed 2, 9/2019 Copyright © 2019 Zyxel Communications Corporation
  • ZyXEL LTE7480-S905 | User Guide - Page 2
    or your computer operating system. Every effort has been made to ensure that the information in this manual is accurate. Related Documentation • Quick Start Guide The Quick Start Guide shows how to connect the Zyxel Device. • More Information Go to support.zyxel.com to find other information on the
  • ZyXEL LTE7480-S905 | User Guide - Page 3
    you may need to configure or helpful tips) or recommendations. Syntax Conventions • The LTE device in this user's guide may be referred to as the "Zyxel Device" in this guide. • Product labels, screen names, field labels and field choices are all in bold font. • A right angle bracket ( > ) within
  • ZyXEL LTE7480-S905 | User Guide - Page 4
    Contents Overview Contents Overview User's Guide ...11 Introduction ...12 The Web Configurator ...17 Quick Start ...24 Technical 136 Log Setting ...139 Firmware Upgrade ...142 Backup/Restore ...144 Diagnostic ...147 Troubleshooting & Appendices ...149 Troubleshooting ...150 LTE Series User's Guide 4
  • ZyXEL LTE7480-S905 | User Guide - Page 5
    ...3 Contents Overview ...4 Table of Contents ...5 Part I: User's Guide 11 Chapter 1 Introduction ...12 1.1 Overview ...12 1.2 Application for the Zyxel Device 13 1.3 Manage the Zyxel Device ...13 1.4 Good Habits for Managing the Zyxel Device 14 1.5 Front and Bottom Panels ...14 1.5.1 LEDs
  • ZyXEL LTE7480-S905 | User Guide - Page 6
    Access in Windows 10 63 Chapter 7 Routing ...66 7.1 Overview ...66 7.2 Configure Static Route ...66 7.2.1 Add/Edit Static Route ...67 7.3 DNS Route ...69 LTE Series User's Guide 6
  • ZyXEL LTE7480-S905 | User Guide - Page 7
    91 10.4.1 Add Customized Service ...91 10.5 Access Control (Rules) ...92 10.5.1 Access Control Add New ACL Rule 93 10.6 DoS ...95 10.7 Firewall Technical Reference ...96 10.7.1 Firewall Rules Overview ...96 10.7.2 Guidelines For Security Enhancement With Your Firewall 97 LTE Series User's Guide 7
  • ZyXEL LTE7480-S905 | User Guide - Page 8
    ARP Table ...116 15.1 ARP Table Overview ...116 15.1.1 How ARP Works ...116 15.2 ARP Table ...117 Chapter 16 Routing Table...118 LTE Series User's Guide 8
  • ZyXEL LTE7480-S905 | User Guide - Page 9
    Account Add/Edit ...127 Chapter 20 Remote Management ...129 20.1 Overview ...129 20.2 MGMT Services ...129 20.3 MGMT Services for IP Passthrough 130 20.4 Trust Domain ...131 20.5 Add Trust Domain ...131 Chapter 21 139 23.1 Log Setting Overview ...139 23.2 Log Setting ...139 LTE Series User's Guide 9
  • ZyXEL LTE7480-S905 | User Guide - Page 10
    & Appendices 149 Chapter 27 Troubleshooting...150 27.1 Overview ...150 27.2 Power and Hardware Connections 150 27.3 Zyxel Device Access and Login 150 27.4 Internet Access ...152 27.5 UPnP ...153 27.6 SIM Card ...154 27.7 Cellular Signal ...154 Appendix A Customer Support ...156 Appendix B IPv6
  • ZyXEL LTE7480-S905 | User Guide - Page 11
    PART I User's Guide 11
  • ZyXEL LTE7480-S905 | User Guide - Page 12
    Zyxel Device by model. Table 1 Zyxel Device Comparison Table LTE7461-M602 Gigabit Ethernet Port V 2.4G WLAN - LTE Speed FDD-LTE • Downlink: 400 Mbps (Optional: 256QAM support) • Uplink: 50 Mbps LTE7480-S905 Protocol) • Remote Management under Bridge mode LTE Series User's Guide 12
  • ZyXEL LTE7480-S905 | User Guide - Page 13
    Service Zyxel Device's PoE injector for configuration via the Web Configurator. Figure 1 Zyxel Device's Internet Access Application WiFi LTE (4G)/3G/2G 1.3 Manage the Zyxel Device Use the Web Configurator for management of the Zyxel Device using a (supported) web browser. LTE Series User's Guide
  • ZyXEL LTE7480-S905 | User Guide - Page 14
    is booting or self-testing. The Zyxel Device encountered an error. The Zyxel Device is trying to connect to the Internet. The Zyxel Device is connected to the Internet. The Zyxel Device WiFi is on. 1.5.2 Bottom Panels The connection ports are located on the bottom panel. LTE Series User's Guide 14
  • ZyXEL LTE7480-S905 | User Guide - Page 15
    for more than five seconds to return the Zyxel Device to the factory defaults. Press the function for 30 minutes by default after the Zyxel Device finishes rebooting or when the wireless function WPS-enabled device within range of the Zyxel Device. To turn off the wireless network, press
  • ZyXEL LTE7480-S905 | User Guide - Page 16
    use the RESET button of the Zyxel Device as shown in the following Zyxel Device back to the factory default settings, press the RESET button for 5 seconds. Note: If you press the RESET button for more than 2 seconds but less than 5 seconds, it will cause the system to reboot. LTE Series User's Guide
  • ZyXEL LTE7480-S905 | User Guide - Page 17
    by default). • Java permissions (enabled by default). 2.1.1 Access the Web Configurator 1 Make sure your Zyxel Device hardware is properly connected (refer to the Quick Start Guide). 2 Launch your web browser. If the Zyxel Device does not automatically re-direct you to the login screen, go to http
  • ZyXEL LTE7480-S905 | User Guide - Page 18
    . 5 The Connection Status screen appears. Use this screen to configure basic Internet access, wireless settings, and parental control settings. Figure 6 Connection Status LTE Series User's Guide 18
  • ZyXEL LTE7480-S905 | User Guide - Page 19
    Icon (Navigation Panel & Side Bar) • B - Widget Icon • C - Main Window 2.2.1 Settings Icon Click this icon ( ) to see the side bar and navigation panel. LTE Series User's Guide 19
  • ZyXEL LTE7480-S905 | User Guide - Page 20
    DESCRIPTION Wizard: Click this icon to open screens where you can configure the Zyxel Device's time zone and wireless settings. See Chapter 3 on page 24 prefer. Restart: Click this icon to reboot the Zyxel Device without turning the power off. Logout: Click this icon to log out of
  • ZyXEL LTE7480-S905 | User Guide - Page 21
    configure Zyxel the Zyxel provided by your service provider. Cellular SIM by your service provider. Cellular static routes on the Zyxel Device. DNS Route Use Zyxel change your Zyxel Device's port services and services. DoS Use this screen to activate protection against Denial of Service
  • ZyXEL LTE7480-S905 | User Guide - Page 22
    screen to view a list of public IP addresses which are allowed to access the Zyxel Device through the services configured in the Maintenance > Remote Management screen. Time Use this screen to change your Zyxel Device's time and date. E-mail Notification Use this screen to configure up to two
  • ZyXEL LTE7480-S905 | User Guide - Page 23
    this screen to backup and restore your Zyxel Device's configuration (settings) or reset Zyxel Device without turning the power off. Diagnostic Ping&Traceroute Use this screen to identify problems Ping, TraceRoute, or Nslookup to help you identify problems. 2.2.2 Widget Icon Click this icon ( ) to
  • ZyXEL LTE7480-S905 | User Guide - Page 24
    CHAPTER 3 Quick Start 3.1 Overview Use the Wizard screens to configure the Zyxel Device's time zone and wireless settings. Note: See the technical reference chapters (starting on Chapter 4 Zone Select the time zone of your location. Click Next. Figure 9 Wizard - Time Zone LTE Series User's Guide 24
  • ZyXEL LTE7480-S905 | User Guide - Page 25
    Name and Password in this screen so you can configure your wireless clients to connect to the Zyxel Device. If you want to show or hide your WiFi password, click the Eye icon ( 3.5 Quick Start Setup-Finish Your Zyxel Device saves your settings and attempts to connect to the Internet. LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 26
    PART II Technical Reference 26
  • ZyXEL LTE7480-S905 | User Guide - Page 27
    ( ) to view IP addresses and MAC addresses of the wireless and wired devices connected to the Zyxel Device. Figure 12 Connectivity: Connected Devices You can change the icon and name of a connected device Blocking for a connected device. Click Save to save your changes. LTE Series User's Guide 27
  • ZyXEL LTE7480-S905 | User Guide - Page 28
    Chapter 4 Connection Status Figure 13 Connectivity: Edit 4.1.2 System Info Use this screen to view the basic system information of the Zyxel Device. Figure 14 System Info Click the Arrow icon ( ) to view the more information on the status of your firewall and interfaces (WAN, LAN, and
  • ZyXEL LTE7480-S905 | User Guide - Page 29
    WAN. IP Subnet Mask IPv6 Address This field displays the current subnet mask in the WAN. This field displays the current IPv6 address of the Zyxel Device in the WAN. Primary DNS server This field displays the first DNS server address assigned by the ISP. LTE Series User's Guide 29
  • ZyXEL LTE7480-S905 | User Guide - Page 30
    WLAN Information MAC Address Status SSID Channel Security 802.11 Mode WPS None - The Zyxel Device is not providing any DHCP services to the LAN. This displays the firewall's current security level. This shows the show or hide your WiFi passwords, click the Eye icon ( ). LTE Series User's Guide 30
  • ZyXEL LTE7480-S905 | User Guide - Page 31
    is enabled. Otherwise, it's not. The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated. Wireless devices displays a pre-shared key generated by the Zyxel Device. If you did not select Random Password, you can manually type a pre-shared key from 8 to
  • ZyXEL LTE7480-S905 | User Guide - Page 32
    ) LABEL DESCRIPTION Random Password Select this option to have the Zyxel Device automatically generate a password. The WiFi Password field will not IP address, subnet mask, and DHCP settings of your Zyxel Device. Figure 18 LAN Click the Arrow icon ( ) to configure the LAN IP settings and
  • ZyXEL LTE7480-S905 | User Guide - Page 33
    .255.255.0 (factory default). Your Zyxel Device automatically computes the subnet mask based on the IP Address you enter, so do not change this field unless you are instructed to do so. IP Addressing Values Beginning DHCP server. Save Click Save to save your changes. LTE Series User's Guide 33
  • ZyXEL LTE7480-S905 | User Guide - Page 34
    Cellular Band screen to view or edit an LTE WAN interface. You can also configure the WAN settings on the Zyxel Device for Internet access (Section 5.4 on page 38). • Use the Cellular PLMN screen to display available Public Land concepts may help as you read this chapter. LTE Series User's Guide 34
  • ZyXEL LTE7480-S905 | User Guide - Page 35
    it each time the Zyxel Device tries to on your Zyxel Device is off. Get this information from your service provider. 5.2 service provider. Note: APN information can be obtained from the service provider. Roaming charges may apply when Data Roaming is enabled. Automatic APN Mode is not supported
  • ZyXEL LTE7480-S905 | User Guide - Page 36
    Zyxel Device. APN Settings APN Manual Mode APN 4G roaming is to use your mobile device in an area which is not covered by your service provider. Enable roaming to ensure that your Zyxel 31 printable ASCII characters) given to you by your service provider. This field allows you to set the password
  • ZyXEL LTE7480-S905 | User Guide - Page 37
    to the Zyxel Device in user name and password the Zyxel Device sends regular challenges to IPv6 if you want the Zyxel Device to run both IPv4 PUK (Personal Unlocking Key) from the service provider to unlock it. Click Network automatically saved in the Zyxel Device. Entering the wrong PIN exceeding
  • ZyXEL LTE7480-S905 | User Guide - Page 38
    to enable ( ) if the service provider requires you to enter a PIN to Click to disable if the service provider lets you use the SIM Either select Auto to have the Zyxel Device connect to an available network using or 2G) to which you want the Zyxel Device to connect. Click Network Setting >
  • ZyXEL LTE7480-S905 | User Guide - Page 39
    Zyxel Device to connect and click Apply to save your settings. Otherwise, select Auto to have the Zyxel too low, the Zyxel Device switches to another available mobile Zyxel Device connect to the service provider using the default settings on the SIM card or manually view available PLMNs and select your service
  • ZyXEL LTE7480-S905 | User Guide - Page 40
    > Broadband > Cellular PLMN > Manual Scan Warning When the next screen appears, clicking Scan will allow the Zyxel Device to check for available PLMNs in its surroundings and display the network list. Figure 26 Network Setting > Broadband > Cellular PLMN > Manual Scan LTE Series User's Guide 40
  • ZyXEL LTE7480-S905 | User Guide - Page 41
    > Broadband > Cellular PLMN > Manual Scan LABEL DESCRIPTION # Status Click the radio button so the Zyxel Device connects to this ISP. This shows Current to show the ISP the Zyxel Device is currently connected to. the following warning appears. Click OK to continue. LTE Series User's Guide 41
  • ZyXEL LTE7480-S905 | User Guide - Page 42
    local network of the Zyxel Device to have access to web services using the public IP LAN computer on the local network of the Zyxel Device. Passthrough to fixed MAC Note: This of a LAN computer on the local network of the Zyxel Device upon selecting Fixed in the previous field. Cancel Apply
  • ZyXEL LTE7480-S905 | User Guide - Page 43
    network number. This is known as an Internet Protocol address. Subnet Mask The subnet mask specifies the network number portion of an IP address. Your Zyxel Device will compute the subnet mask automatically based on the IP address that you entered. You do not need to change the subnet mask computed
  • ZyXEL LTE7480-S905 | User Guide - Page 44
    own services and reasons, the Zyxel Device allows multicast Zyxel Zyxel has achieved UPnP certification from the Universal Plug and Play Forum UPnP™ Implementers Corp. (UIC). Zyxel's UPnP implementation supports your Zyxel Device and configure the DNS server information that the Zyxel Device
  • ZyXEL LTE7480-S905 | User Guide - Page 45
    Chapter 6 Home Networking Figure 29 Network Setting > Home Networking > LAN Setup LTE Series User's Guide 45
  • ZyXEL LTE7480-S905 | User Guide - Page 46
    instructed to do so. Select Enable to have your Zyxel manually configure the IP addresses of the computers and other devices on your LAN. If you select DHCP Relay, the Zyxel Zyxel Device supports DNS proxy by default. The Zyxel (and the Zyxel Device's WAN Zyxel Device's own LAN IP address. The Zyxel
  • ZyXEL LTE7480-S905 | User Guide - Page 47
    the Zyxel manually enter an interface ID for the LAN interface's global IPv6 address. Select Delegate prefix from WAN to automatically obtain an IPv6 network prefix from the service provider or an uplink router. Select Static to configure a fixed IPv6 address for the Zyxel Zyxel the Zyxel Device
  • ZyXEL LTE7480-S905 | User Guide - Page 48
    Zyxel Device handles clients' DNS information requests. IPv4/IPv6 DNS Server: The Zyxel Zyxel Device forwards the requests to the IPv6 DNS server and sends clients the DNS information it receives. IPv4 DNS Server Only: The Zyxel Zyxel : The Zyxel Device forwards change your Zyxel Device's static
  • ZyXEL LTE7480-S905 | User Guide - Page 49
    DESCRIPTION Active Enable static DHCP in your Zyxel Device. Group Name This displays the (non-configurable). Select Device Info Select between Manual Input which allows you to enter the next two of a computer on your LAN if you select Manual Input in the previous field. IP Address Enter the
  • ZyXEL LTE7480-S905 | User Guide - Page 50
    on UPnP. Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting > Home Networking > UPnP to display the application to open the Web Configurator's login screen without entering the Zyxel Device's IP address (although you must still enter the password to
  • ZyXEL LTE7480-S905 | User Guide - Page 51
    to other UPnP devices and enable exchange of simple product and service descriptions. # This field displays the index number of the this chapter. LANs, WANs and the Zyxel Device The actual physical connection determines whether the Zyxel Device ports are LAN or WAN ports. LTE Series User's Guide 51
  • ZyXEL LTE7480-S905 | User Guide - Page 52
    Home Networking hosts without problems. However, the installed in Windows 7. Activate UPnP on the Zyxel Device by clicking Network Setting > Home Networking > UPnP. Make sure is connected to the LAN port of the Zyxel Device. Turn on your computer and the Zyxel Device. 1 Click the start icon, Control
  • ZyXEL LTE7480-S905 | User Guide - Page 53
    share files and printers. 6.6.1 Auto-discover Your UPnP-enabled Network Device Before you follow these steps, make sure you already have UPnP activated on the Zyxel Device and in your computer. Make sure your computer is connected to the LAN port of the
  • ZyXEL LTE7480-S905 | User Guide - Page 54
    6 Home Networking 1 Open Windows Explorer and click Network. 2 Right-click the Zyxel Device icon and select Properties. Figure 34 Network Connections 3 In the Internet Connection 4 You may edit or delete the port mappings or click Add to manually add port mappings. LTE Series User's Guide 54
  • ZyXEL LTE7480-S905 | User Guide - Page 55
    connection status, right click the network icon in the system tray and click Open Network and Sharing Center. Click Local Area Network. LTE Series User's Guide 55
  • ZyXEL LTE7480-S905 | User Guide - Page 56
    by clicking Network Setting > Home Networking > UPnP. Make sure the computer is connected to the LAN port of the Zyxel Device. Turn on your computer and the Zyxel Device. 1 Click the start icon, Settings and then Network & Internet. 2 Click Network and Sharing Center. LTE Series User's Guide 56
  • ZyXEL LTE7480-S905 | User Guide - Page 57
    on the network and other computers on the network to find your computer. This makes it easier to share files and printers. LTE Series User's Guide 57
  • ZyXEL LTE7480-S905 | User Guide - Page 58
    you follow these steps, make sure you already have UPnP activated on the Zyxel Device and in your computer. Make sure your computer is connected to the LAN port of the Zyxel Device. 1 Open File Explorer and click Network. 2 Right-click the Zyxel Device icon and select Properties. LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 59
    Chapter 6 Home Networking Figure 40 Network Connections 3 In the Internet Connection Properties window, click Settings to see port mappings. Figure 41 Internet Connection Properties 4 You may edit or delete the port mappings or click Add to manually add port mappings. LTE Series User's Guide 59
  • ZyXEL LTE7480-S905 | User Guide - Page 60
    the network icon in the system tray and click Open Network & Internet settings. Click Network and Sharing Center and click the Connections. LTE Series User's Guide 60
  • ZyXEL LTE7480-S905 | User Guide - Page 61
    Networking Figure 45 Internet Connection Status 6.8 Web Configurator Easy Access in Windows 7 With UPnP, you can access the Web-based Configurator on the Zyxel Device without needing to find out the IP address of the Zyxel Device first. This comes helpful if you do not know the IP address of the
  • ZyXEL LTE7480-S905 | User Guide - Page 62
    View device webpage. The Web Configurator login screen displays. Figure 47 Network Connections: My Network Places 5 Right-click the icon for your Zyxel Device and select Properties. Click the Network Device tab. A window displays with information about the Zyxel Device. LTE Series User's Guide 62
  • ZyXEL LTE7480-S905 | User Guide - Page 63
    Chapter 6 Home Networking Figure 48 Network Connections: My Network Places: Properties: Example 6.9 Web Configurator Easy Access in Windows 10 Follow the steps below to access the Web Configurator. 1 Open File Explorer. 2 Click Network. LTE Series User's Guide 63
  • ZyXEL LTE7480-S905 | User Guide - Page 64
    View device webpage. The Web Configurator login screen displays. Figure 50 Network Connections: Network Infrastructure 5 Right-click the icon for your Zyxel Device and select Properties. Click the Network Device tab. A window displays information about the Zyxel Device. LTE Series User's Guide 64
  • ZyXEL LTE7480-S905 | User Guide - Page 65
    Chapter 6 Home Networking Figure 51 Network Connections: Network Infrastructure: Properties: Example LTE Series User's Guide 65
  • ZyXEL LTE7480-S905 | User Guide - Page 66
    connected to the Zyxel Device's LAN interface. The Zyxel Device routes most traffic from A to the Internet through the Zyxel Device's default gateway (R1). You create one static route to connect to services offered by your Setting > Routing to open the Static Route screen. LTE Series User's Guide 66
  • ZyXEL LTE7480-S905 | User Guide - Page 67
    IP address of the gateway. The gateway is a router or switch on the same network segment as the Zyxel Device's LAN or WAN port. The gateway helps forward packets to their destinations. Interface This is the WAN the range of the selected interface in Use Interface. LTE Series User's Guide 67
  • ZyXEL LTE7480-S905 | User Guide - Page 68
    IPv4 address) allows up to 3.4 x 1038 IP addresses. The Zyxel Device can use IPv4/IPv6 dual stack to connect to IPv4 and IPv6 networks, and supports IPv6 rapid deployment (6RD). This parameter specifies the IP network address any changes. Click this to save your changes. LTE Series User's Guide 68
  • ZyXEL LTE7480-S905 | User Guide - Page 69
    mapping queries are forwarded from the Zyxel Device to a DNS (Domain Name System) server if your Zyxel Device has multiple WAN interfaces. Click icon to configure a DNS route on the Zyxel Device. Click the Delete icon to remove a DNS route from the Zyxel Device. 7.3.1 Add/Edit DNS Route Click
  • ZyXEL LTE7480-S905 | User Guide - Page 70
    character, an "*" (asterisk) as the left most part of a domain name, such as *.example.com. The Zyxel Device forwards DNS queries for any domain name ending in example.com to the WAN interface specified in this route. traffic among multiple paths for load sharing. LTE Series User's Guide 70
  • ZyXEL LTE7480-S905 | User Guide - Page 71
    The Policy Route screen let you view and configure routing policies on the Zyxel Device. Click Network Setting > Routing > Policy Route to open the following the Delete icon to remove a policy from the Zyxel Device. A window displays asking you to confirm that you want to delete the policy. LTE
  • ZyXEL LTE7480-S905 | User Guide - Page 72
    in the Broadband screens. Cancel Click Cancel to exit this screen without saving any changes. OK Click OK to save your changes. LTE Series User's Guide 72
  • ZyXEL LTE7480-S905 | User Guide - Page 73
    Zyxel Device to exchange routing information with other routers. To activate RIP for the WAN interface, select the supported Zyxel Device sends (it recognizes both formats when receiving). RIP version 1 is universally supported the Zyxel Device advertise check box to set the Zyxel Device to not send
  • ZyXEL LTE7480-S905 | User Guide - Page 74
    this Chapter • Use the Port Forwarding screen to configure forward incoming service requests to the servers on your local network (Section 8.2 on Local Inside/outside denotes where a host is located relative to the Zyxel Device, for example, the computers of your subscribers are the inside Guide 74
  • ZyXEL LTE7480-S905 | User Guide - Page 75
    80 and FTP on port 21. In some cases, such as for unknown services or where one server can support more than one service (for example both FTP and web service), it might be better to specify a range of port numbers. You NAT network appears as a single host on the Internet. LTE Series User's Guide 75
  • ZyXEL LTE7480-S905 | User Guide - Page 76
    signifies that this rule is not active. This is the service's name. This shows User Defined if you manually added a service. You can change this by clicking the edit icon. This that identifies a service. This is the last external port number that identifies a service. LTE Series User's Guide 76
  • ZyXEL LTE7480-S905 | User Guide - Page 77
    Port Protocol Modify This is the first internal port number that identifies a service. This is the last internal port number that identifies a service. This field displays the protocol (TCP, UDP, TCP+UDP) used open the following screen. Figure 62 Port Forwarding: Add/Edit LTE Series User's Guide 77
  • ZyXEL LTE7480-S905 | User Guide - Page 78
    Service Name WAN Interface Start service want the Zyxel Device to the protocol supported by this Triggering Some services use a dedicated problem is that port forwarding only forwards a service to a single LAN IP address. In order to use the same service on a different LAN computer, you have to manually
  • ZyXEL LTE7480-S905 | User Guide - Page 79
    service. Doing away the need to configure a new IP address each time you want a different LAN computer to use a service. The Zyxel Zyxel Device to record Jane's computer IP address. The Zyxel -7170. 4 The Zyxel Device forwards the traffic out. The Zyxel Device times out view your Zyxel Device's trigger
  • ZyXEL LTE7480-S905 | User Guide - Page 80
    uses when it sends out a particular service. The Zyxel Device forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service. Open End Port Open Protocol Modify This sending out requests and for receiving responses. LTE Series User's Guide 80
  • ZyXEL LTE7480-S905 | User Guide - Page 81
    Service Name that causes (or triggers) the Zyxel Device to record the IP a particular service. The Zyxel Device forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service behind the Zyxel Device and
  • ZyXEL LTE7480-S905 | User Guide - Page 82
    do not assign a default server, the Zyxel Device discards all packets received for ports not Click this to save your changes back to the Zyxel Device. 8.5 ALG Click Network Setting > NAT the NAT Application Layer Gateway (ALG) in the Zyxel Device. Application Layer Gateway (ALG) allows certain
  • ZyXEL LTE7480-S905 | User Guide - Page 83
    gray) the SIP ALG. PPTP ALG Click this to turn on (switch turns blue) the PPTP ALG on the Zyxel Device to detect PPTP traffic and help build PPTP sessions through the Zyxel Device's NAT. Cancel Click Cancel to restore your previously saved settings. Apply Click Apply to save your changes back
  • ZyXEL LTE7480-S905 | User Guide - Page 84
    access it. In addition to the system DNS server(s), each WAN interface (service) is set to have its own static or dynamic DNS server list. You resolve domain names that do not match any DNS routing entry. After the Zyxel Device receives a DNS reply from a DNS server, it creates a new entry Guide 84
  • ZyXEL LTE7480-S905 | User Guide - Page 85
    and vice versa. Use this screen to view and configure DNS routes on the Zyxel Device. Click Network Setting > DNS to open the DNS Entry screen. Note: to delete an existing rule. 9.2.1 Add/Edit DNS Entry You can manually add or edit the Zyxel Device's DNS name and IP address entry. Click Add New DNS
  • ZyXEL LTE7480-S905 | User Guide - Page 86
    any changes. OK Click OK to save your changes. 9.3 Dynamic DNS Dynamic DNS can update your current dynamic IP address mapping to a hostname. Configure a DDNS service provider on your Zyxel Device. Click Network Setting > DNS > Dynamic DNS. The screen appears as shown. LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 87
    DNS Setup Dynamic DNS Service Provider Select Enable to use dynamic DNS. Select your Dynamic DNS service provider from the drop-down list box. Host Name Type the domain name assigned to your Zyxel Device by your any changes. Apply Click Apply to save your changes. LTE Series User's Guide 87
  • ZyXEL LTE7480-S905 | User Guide - Page 88
    on other networks from going to the LAN. By default, the Zyxel Device blocks DoS attacks whether the firewall is enabled or disabled. The Firewall Action 10.1.1 What You Need to Know About Firewall DoS Denials of Service (DoS) attacks are aimed at devices and networks with a connection to Guide 88
  • ZyXEL LTE7480-S905 | User Guide - Page 89
    to configure the security level of the firewall on the Zyxel Device (Section 10.3 on page 89). • Use the Protocol screen to add or remove predefined Internet services and configure firewall rules (Section 10.4 on page the slider to select the level of firewall protection. LTE Series User's Guide 89
  • ZyXEL LTE7480-S905 | User Guide - Page 90
    services. WAN to LAN is the access of other computers on the Internet to devices behind the Zyxel Device local network traffic and LAN to WAN service (Telnet, FTP, HTTP, HTTPS, Internet from accessing any services on your local network. Low the Internet to access services on your local network.
  • ZyXEL LTE7480-S905 | User Guide - Page 91
    comprehensive list of port numbers and services, visit the IANA (Internet Assigned service. Name This is the name of your customized service. Description This is a description of your customized service service. Modify Click this to edit a customized service. 10.4.1 Add Customized Service Add
  • ZyXEL LTE7480-S905 | User Guide - Page 92
    An Access Control List (ACL) rule is a manually-defined rule that can accept, reject, or drop incoming or outgoing packets from your network based on the type of service. For example, you could block users using Instant is very important as rules are applied in turn. LTE Series User's Guide 92
  • ZyXEL LTE7480-S905 | User Guide - Page 93
    New ACL Rule This read-only bar shows how much of the Zyxel Device's memory for recording firewall rules it is currently using. When displays the source IP addresses to which this rule applies. Dest IP Service This field displays the destination IP addresses to which this rule applies. Guide 93
  • ZyXEL LTE7480-S905 | User Guide - Page 94
    -bit IPv4 address) allows up to 3.4 x 1038 IP addresses. The Zyxel Device can use IPv4/IPv6 dual stack to connect to IPv4 and IPv6 networks, and supports IPv6 rapid deployment (6RD). Select Service Select a service from the Select Service box. Protocol Select the protocol (ALL, TCP/UDP, TCP, UDP
  • ZyXEL LTE7480-S905 | User Guide - Page 95
    .6 DoS Activate protection against DoS attacks. DoS (Denial of Service) attacks can flood your Internet connection with invalid packets and connection Protection Blocking Enable this to protect against DoS attacks. The Zyxel Device will drop sessions that surpass maximum thresholds. Cancel Click
  • ZyXEL LTE7480-S905 | User Guide - Page 96
    can access which computers or services on the WAN. By default, the Zyxel Device's stateful packet inspection Zyxel Device. You may define additional rules and sets or modify existing ones but please exercise extreme caution in doing so. For example, you may create rules to: LTE Series User's Guide
  • ZyXEL LTE7480-S905 | User Guide - Page 97
    administrator. Your customized rules take precedence and override the Zyxel Device's default rules. 10.7.2 Guidelines For Security Enhancement if IRC (Internet Relay Chat) is blocked, are there users that require this service? 2 Is it possible to modify the rule to be more specific? For Guide 97
  • ZyXEL LTE7480-S905 | User Guide - Page 98
    Chapter 10 Firewall Once these questions have been answered, adding rules is simply a matter of entering the information into the correct fields in the Web Configurator screens. LTE Series User's Guide 98
  • ZyXEL LTE7480-S905 | User Guide - Page 99
    CHAPTER 11 MAC Filter 11.1 MAC Filter Overview You can configure the Zyxel Device to permit access to clients based on their MAC addresses in the MAC Filter screen. This applies to wired under Active is selected if you want to use a filter, as shown in the example below. LTE Series User's Guide 99
  • ZyXEL LTE7480-S905 | User Guide - Page 100
    Restrict Mode Select Allow to only permit the listed MAC addresses access to the Zyxel Device. Select Deny to permit anyone access to the Zyxel Device except the listed MAC addresses. Add New Rule Click this button to create . Apply Click Apply to save your changes. LTE Series User's Guide 100
  • ZyXEL LTE7480-S905 | User Guide - Page 101
    Zyxel Local Certificates screen to view and import the Zyxel Device's CA-signed (Certification Authority) certificates ( Zyxel Device. You can also export the certificates to a computer (Section 12.3 on page 105). 12.2 Local Certificates View the Zyxel certificates to your Zyxel Device: • Web
  • ZyXEL LTE7480-S905 | User Guide - Page 102
    key into the text box to store it on the Zyxel Device. The private key should not exceed 63 ASCII characters Zyxel Device. Create Certificate Click this button to go to the screen where you can have the Zyxel to open the following screen. Have the Zyxel Device generate a certification request. To
  • ZyXEL LTE7480-S905 | User Guide - Page 103
    this certificate. Common Name Select Auto to have the Zyxel Device configure this field automatically. Or select Customize to enter it manually. Organization Name State/Province Name Country/Region Name Cancel OK Local Certificates screen to open the following screen. LTE Series User's Guide 103
  • ZyXEL LTE7480-S905 | User Guide - Page 104
    into a text editor and save the file on a management computer for later distribution. This field displays the private key of this certificate. LTE Series User's Guide 104
  • ZyXEL LTE7480-S905 | User Guide - Page 105
    to open a screen where you can save the certificate of a certification authority that you trust to the Zyxel Device. This is the index number of the entry. This field displays the name used to identify this a certificate that one or more features is configured to use. LTE Series User's Guide 105
  • ZyXEL LTE7480-S905 | User Guide - Page 106
    exit this screen without saving any changes. OK Click this to save the certificate on the Zyxel Device. 12.5 View Trusted CA Certificate View in-depth information about the certification authority's certificate. Click the View icon to open the View Certificate screen. LTE Series User's Guide 106
  • ZyXEL LTE7480-S905 | User Guide - Page 107
    certificates and guarantees the identity of each certificate owner. There are commercial certification authorities like CyberTrust or VeriSign and government certification authorities. LTE Series User's Guide 107
  • ZyXEL LTE7480-S905 | User Guide - Page 108
    private key to encrypt a message and Tim uses Jenny's public key to decrypt the message. The Zyxel Device uses certificates based on public-key cryptology to authenticate users attempting to establish a connection. The where you have the certificate saved on your computer. LTE Series User's Guide 108
  • ZyXEL LTE7480-S905 | User Guide - Page 109
    fields. The secure method may vary based on your situation. Possible examples would be over the telephone or through an HTTPS connection. LTE Series User's Guide 109
  • ZyXEL LTE7480-S905 | User Guide - Page 110
    screens allow you to determine the categories of events and/or alerts that the Zyxel Device logs and then display these logs or have the Zyxel Device send them to an administrator (through email) or to a syslog 4 Warning: There is a warning condition on the system. LTE Series User's Guide 110
  • ZyXEL LTE7480-S905 | User Guide - Page 111
    This filters search results according to the severity level you have selected. When you select a severity, the Zyxel Device searches through all logs of that severity or higher. Category Select the type of logs to display Log > Security Log to open the following screen. LTE Series User's Guide 111
  • ZyXEL LTE7480-S905 | User Guide - Page 112
    This filters search results according to the severity level you have selected. When you select a severity, the Zyxel Device searches through all logs of that severity or higher. Category Select the type of logs to display. This field states the reason for the log. LTE Series User's Guide 112
  • ZyXEL LTE7480-S905 | User Guide - Page 113
    Click System Monitor > Traffic Status to open the WAN screen. The figures in this screen show the number of bytes received and sent through the Zyxel Device. Detailed information about each interface are listed in the tables below. Figure 90 System Monitor > Traffic Status > WAN LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 114
    50 System Monitor > Traffic Status > WAN LABEL DESCRIPTION Refresh Interval Select how often you want the Zyxel Device to update this screen. Connected Interface This shows the name of the WAN interface that is and sent from each LAN port and wireless network. LTE Series User's Guide 114
  • ZyXEL LTE7480-S905 | User Guide - Page 115
    System Monitor > Traffic Status > LAN LABEL DESCRIPTION Refresh Interval Select how often you want the Zyxel Device to update this screen. Interface This shows the LAN or WLAN interface. Bytes Sent This number of received packets dropped on this interface. LTE Series User's Guide 115
  • ZyXEL LTE7480-S905 | User Guide - Page 116
    the requesting machine. ARP updates the ARP table for future reference and then sends the packet to the MAC address that replied. LTE Series User's Guide 116
  • ZyXEL LTE7480-S905 | User Guide - Page 117
    This is the type of interface used by the device. You can click the device type to go to its configuration screen. LTE Series User's Guide 117
  • ZyXEL LTE7480-S905 | User Guide - Page 118
    16 Routing Table 16.1 Routing Table Overview Routing is based on the destination address only and the Zyxel Device takes the shortest path to forward a packet. 16.2 Routing Table The table below shows IPv4 hops). Interface is how the packets for this route will be sent. LTE Series User's Guide 118
  • ZyXEL LTE7480-S905 | User Guide - Page 119
    address of the gateway that helps forward this route's traffic. Subnet Mask This indicates the destination subnet mask of the IPv4 route. LTE Series User's Guide 119
  • ZyXEL LTE7480-S905 | User Guide - Page 120
    "cost." The smaller the number, the lower the "cost." This indicates the name of the interface through which the route is forwarded. LTE Series User's Guide 120
  • ZyXEL LTE7480-S905 | User Guide - Page 121
    connection details and WiFi signal strength value that you can use as reference for positioning the Zyxel Device, as well as SIM card and module information. 17.2 Cellular WAN Status To you insert a valid SIM card in the Zyxel Device. Figure 94 System Monitor > Cellular WAN Status LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 122
    Zyxel the Zyxel service provider requires you to enter a PIN to use the SIM card. Shows Disable if the service Zyxel Device in an area which is not covered by your service provider. Enable roaming to ensure that your Zyxel Zyxel Device is connecting. This displays the current LTE band of your Zyxel
  • ZyXEL LTE7480-S905 | User Guide - Page 123
    no network connection. This displays the Received Signal Code Power, which measures the power of channel used by the Zyxel Device. The received signal level, in dBm, is of the CPICH channel (Ref. 3GPP TS 25.133). An The value is 'N/A' if there is no network connection. LTE Series User's Guide 123
  • ZyXEL LTE7480-S905 | User Guide - Page 124
    network connection. This displays the RAC (Routing Area Code), which is used in mobile network "packet domain service" (PS) to identify a routing area within a location area. In a mobile network, it uses LAC (Physical Uplink Shared Channel) based on uplink scheduling. LTE Series User's Guide 124
  • ZyXEL LTE7480-S905 | User Guide - Page 125
    reach the Zyxel Device network from the Internet, and the host name is used to reach a computer behind the Zyxel Device. 18 Host Name Type a host name for your Zyxel Device. Enter a descriptive name of up Name Type a Domain name for your host Zyxel Device. Cancel Click Cancel to abandon this screen
  • ZyXEL LTE7480-S905 | User Guide - Page 126
    that you use to log into the Zyxel Device. 19.2 User Account Click Maintenance > accounts and their privileges on the Zyxel Device. Figure 96 Maintenance > of the account used to log into the Zyxel Device Web Configurator. Retry Times Idle Timeout Zyxel Device will automatically log the user out of
  • ZyXEL LTE7480-S905 | User Guide - Page 127
    that as you type a password, the screen displays a (*) for each character you type. After you change the password, use the new password to access the Zyxel Device. Verify Password Type the new password again for confirmation. LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 128
    entered for this account. 0 means there is no limit. Enter the length of inactive time before the Zyxel Device will automatically log the user out of the Web Configurator. Enter the length of time a user must your previously saved settings. Click OK to save your changes. LTE Series User's Guide 128
  • ZyXEL LTE7480-S905 | User Guide - Page 129
    ) can access the Zyxel Device. Note: The Zyxel Device is managed using the Web Configurator. 20.2 MGMT Services Note: The MGMT Services screen will be hidden access the Zyxel Device for a given service. You can also specify the service port numbers computers must use to connect to the Zyxel Device.
  • ZyXEL LTE7480-S905 | User Guide - Page 130
    one or more WAN connections to have the Zyxel Device activate the remote management service when the selected WAN connections are up. Enable Services for IP Passthrough to open the following screen. Figure 99 Maintenance > Remote Management > MGMT Services for IP Passthrough LTE Series User's Guide
  • ZyXEL LTE7480-S905 | User Guide - Page 131
    Services for IP Passthrough LABEL DESCRIPTION Service This is the service you may use to access the Zyxel Device. WAN Select the Enable check box for the corresponding services Zyxel Device through the services Zyxel Device from the WAN through the specified services to the Zyxel Device. Click
  • ZyXEL LTE7480-S905 | User Guide - Page 132
    Management > Trust Domain > Add Trust Domain LABEL DESCRIPTION IP Address Enter a public IPv4/IPv6 IP address which is allowed to access the service on the Zyxel Device from the WAN. Cancel Click Cancel to restore your previously saved settings. OK Click OK to save your changes back to the
  • ZyXEL LTE7480-S905 | User Guide - Page 133
    how to configure system related settings, such as system time, password, name, the domain name and the inactivity timeout interval. 21.2 Time Configure the Zyxel Device's time based on your local time zone. You can add a time server address, select your time zone, and configure Daylight Savings if
  • ZyXEL LTE7480-S905 | User Guide - Page 134
    the time with the time server. This displays the date of your Zyxel Device. Each time you reload this screen, the Zyxel Device synchronizes the date with the time server. Time and Date Setup Time Protocol This displays the time protocol used by your Zyxel Device. LTE Series User's Guide 134
  • ZyXEL LTE7480-S905 | User Guide - Page 135
    ahead of GMT or UTC (GMT+1). Click Cancel to exit this screen without saving any changes. Click Apply to save your changes. LTE Series User's Guide 135
  • ZyXEL LTE7480-S905 | User Guide - Page 136
    the sender and receiver. 22.2 E-mail Notification View, remove and add e-mail account information on the Zyxel Device. This account can be set to send e-mail notifications for logs. Click Maintenance > E-mail Security This field displays the protocol used for encryption. LTE Series User's Guide 136
  • ZyXEL LTE7480-S905 | User Guide - Page 137
    want to be in the from/sender line of the e-mail that the Zyxel Device sends. Remove Click this button to delete the entry. 22.2.1 E-mail want to be in the from/sender line of the e-mail notification that the Zyxel Device sends. If you activate SSL/TLS authentication, the e-mail address must be
  • ZyXEL LTE7480-S905 | User Guide - Page 138
    SSL to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want encrypted communications between the mail server and the Zyxel Device. Cancel OK Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS. Click this button to begin configuring this
  • ZyXEL LTE7480-S905 | User Guide - Page 139
    Setting Overview You can configure where the Zyxel Device sends logs and which logs and/or immediate alerts the Zyxel Device records. 23.2 Log Setting If the Zyxel Device. Local File and Remote means your logs are stored both on the Zyxel Device and on a syslog server. To change your Zyxel Device's
  • ZyXEL LTE7480-S905 | User Guide - Page 140
    on the Zyxel Device itself. Select Local File and Remote to have the Zyxel Device save the log file on the Zyxel Device itself and send it to an external syslog server. Note: A warning appears upon selecting Remote or Local File and Remote. Just click OK to continue. LTE Series User's Guide 140
  • ZyXEL LTE7480-S905 | User Guide - Page 141
    to. This field allows you to enter a descriptive name for the system log e-mail (for example Zyxel System Log). Up to 127 characters are allowed for the System Log Mail Subject including special characters inside saved settings. Click Apply to save your changes. LTE Series User's Guide 141
  • ZyXEL LTE7480-S905 | User Guide - Page 142
    This chapter explains how to upload new firmware to your Zyxel Device. You can download new firmware releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your Zyxel Device's performance. Only use firmware for your Zyxel Device's specific model. Refer to the label on the
  • ZyXEL LTE7480-S905 | User Guide - Page 143
    After you see the firmware updating screen, wait a few minutes before logging into the Zyxel Device again. The Zyxel Device automatically restarts in this time causing a temporary network disconnect. In some operating systems to go back to the Firmware Upgrade screen. LTE Series User's Guide 143
  • ZyXEL LTE7480-S905 | User Guide - Page 144
    /Restore Overview Back up and restore your Zyxel Device configurations. You can also reset your Zyxel Device settings back to the factory default. you to back up (save) the Zyxel Device's current configuration to a file on your computer. Once the Zyxel Device is configured and functioning properly,
  • ZyXEL LTE7480-S905 | User Guide - Page 145
    save the Zyxel Device's current to your Zyxel Device. Table Zyxel Device settings back to the factory default. Do not turn off the Zyxel Device while configuration file upload is in progress. After the Zyxel the Zyxel Device. The Zyxel Device as that of the default Zyxel Device IP address (192.168
  • ZyXEL LTE7480-S905 | User Guide - Page 146
    Chapter 25 Backup/Restore Figure 110 Maintenance > Reboot LTE Series User's Guide 146
  • ZyXEL LTE7480-S905 | User Guide - Page 147
    screens display information to help you identify problems with the Zyxel Device. 26.2 Ping/TraceRoute/Nslookup Test Perform ping, traceroute, or nslookup for troubleshooting. Ping and traceroute are used to . Figure 111 Maintenance > Diagnostic > Ping/Trace Route/Nslookup LTE Series User's Guide 147
  • ZyXEL LTE7480-S905 | User Guide - Page 148
    Click this button to perform a DNS lookup on the IP address or host name. Speed Test Click this button to perform speed test on the Zyxel Device. LTE Series User's Guide 148
  • ZyXEL LTE7480-S905 | User Guide - Page 149
    PART III Troubleshooting & Appendices Appendices contain general information. Some information may not apply to your Zyxel Device. 149
  • ZyXEL LTE7480-S905 | User Guide - Page 150
    CHAPTER 27 Troubleshooting 27.1 Overview This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. • Power and Hardware Connections • Zyxel Device Access and Login • Internet Access • UPnP • SIM Card • Cellular
  • ZyXEL LTE7480-S905 | User Guide - Page 151
    new IP address. • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the Zyxel Device. 2 Check the hardware connections, see the Quick Start Guide. 3 Make sure your Internet browser does not block pop-up windows and has JavaScript
  • ZyXEL LTE7480-S905 | User Guide - Page 152
    access the Internet anymore. I had access to the Internet (with the Zyxel Device), but my Internet connection is not available anymore. 1 Check the hardware connections (refer to the Quick Start Guide). 2 Turn the Zyxel Device off and on. 3 If the problem continues, contact your ISP. LTE Series User
  • ZyXEL LTE7480-S905 | User Guide - Page 153
    or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. 2 Turn the Zyxel Device off and on. 3 If the problem continues, contact the network administrator or vendor, or try the advanced suggestion (refer to I cannot see or access the
  • ZyXEL LTE7480-S905 | User Guide - Page 154
    Troubleshooting The SIM card cannot be detected. 1 Disconnect the Zyxel its slot and connect the Zyxel Device to the power supply Zyxel Device is in the coverage area of a cellular network. 27.7 Cellular Signal How should I position the Zyxel Zyxel Zyxel Device. 2 Position the Zyxel Zyxel Device before
  • ZyXEL LTE7480-S905 | User Guide - Page 155
    Troubleshooting Although installing the Zyxel Device as high as possible is the usual rule of thumb, it is sometimes possible that the Zyxel Device is in a weak coverage spot at that specific height. Adjust the height to achieve the best service or is out-of-service. As the network design and
  • ZyXEL LTE7480-S905 | User Guide - Page 156
    Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a Zyxel office for the region in which you bought the device. See https://www.zyxel.com/homepage.shtml and also https://www.zyxel.com
  • ZyXEL LTE7480-S905 | User Guide - Page 157
    Support Korea • Zyxel Korea Corp. • http://www.zyxel.kr Malaysia • Zyxel Malaysia Sdn Bhd. • http://www.zyxel.com.my Pakistan • Zyxel Pakistan (Pvt.) Ltd. • http://www.zyxel.com.pk Philippines • Zyxel Philippines • http://www.zyxel.com.ph Singapore • Zyxel Singapore Pte Ltd. • http://www.zyxel
  • ZyXEL LTE7480-S905 | User Guide - Page 158
    A Customer Support • https://www.zyxel.com/be/fr/ Bulgaria • Zyxel https://www.zyxel.com/bg/bg/ Czech Republic • Zyxel Communications Czech s.r.o • https://www.zyxel.com/cz/cs/ Denmark • Zyxel Communications A/S • https://www.zyxel.com/dk/da/ Estonia • Zyxel Estonia • https://www.zyxel.com/ee
  • ZyXEL LTE7480-S905 | User Guide - Page 159
    Support Lithuania • Zyxel Lithuania • https://www.zyxel.com/lt/lt/ Netherlands • Zyxel Benelux • https://www.zyxel.com/nl/nl/ Norway • Zyxel Communications • https://www.zyxel.com/no/no/ Poland • Zyxel Communications Poland • https://www.zyxel.com/pl/pl/ Romania • Zyxel Romania • https://www.zyxel
  • ZyXEL LTE7480-S905 | User Guide - Page 160
    Appendix A Customer Support Turkey • Zyxel Turkey A.S. • https://www.zyxel.com/tr/tr/ UK • Zyxel Communications UK Ltd. • https://www.zyxel.com/uk/en/ Ukraine • Zyxel Ukraine • http://www.ua.zyxel.com South America Argentina • Zyxel Communications Corporation • https://www.zyxel.com/co/es/ Brazil •
  • ZyXEL LTE7480-S905 | User Guide - Page 161
    Appendix A Customer Support Middle East • Zyxel Communications Corporation • https://www.zyxel.com/me/en/ North America USA • Zyxel Communications, Inc. - North America Headquarters • https://www.zyxel.com/us/en/ Oceania Australia • Zyxel Communications Corporation • https://www.zyxel.com/au/en/
  • ZyXEL LTE7480-S905 | User Guide - Page 162
    address uniquely identifies a device on the Internet. It is similar to a "public IP address" in IPv4. A global unicast address starts with a 2 or 3. LTE Series User's Guide 162
  • ZyXEL LTE7480-S905 | User Guide - Page 163
    In IPv6, multicast addresses provide the same functionality as IPv4 broadcast addresses. Broadcasting is not supported in IPv6. A multicast address allows a host to send packets to all hosts in a :0:0:0:0:0:0:0 FF0B:0:0:0:0:0:0:0 FF0C:0:0:0:0:0:0:0 FF0D:0:0:0:0:0:0:0 LTE Series User's Guide 163
  • ZyXEL LTE7480-S905 | User Guide - Page 164
    a Rebind message to any available server (S2). For an IA_TA, the client may send a Renew or Rebind message at the client's discretion. LTE Series User's Guide 164
  • ZyXEL LTE7480-S905 | User Guide - Page 165
    ) to generate its LAN IP address. Through sending Router Advertisements (RAs) regularly by multicast, the Zyxel Device passes the IPv6 prefix information to its LAN hosts. The hosts then can use the prefix to a router that can act as the default router and forward packets. LTE Series User's Guide 165
  • ZyXEL LTE7480-S905 | User Guide - Page 166
    destination cache to determine the next hop. If there is no matching entry in the destination cache, the Zyxel Device uses the prefix list to determine whether the destination address is on-link and can be reached directly without to this port should remain in the group. LTE Series User's Guide 166
  • ZyXEL LTE7480-S905 | User Guide - Page 167
    Appendix B IPv6 Example - Enabling IPv6 on Windows 7 Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7 computer. To enable IPv6 in Windows 7: 1 Select 255.255.255.0 Default Gateway fe80::213:49ff:feaa:7125%11 172.16.100.254 LTE Series User's Guide 167
  • ZyXEL LTE7480-S905 | User Guide - Page 168
    manual, or otherwise, without the prior written permission of Zyxel Communications Corporation. Published by Zyxel Communications Corporation. All rights reserved. Disclaimer Zyxel Danish) Zyxel 2014/53/ЕC. National Restrictions • The Belgian Institute for Postal Services and Guide 168
  • ZyXEL LTE7480-S905 | User Guide - Page 169
    við grunnkröfur og önnur viðeigandi ákvæði tilskipunar 2014/53/ UE. Con la presente Zyxel dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/ at the connector (specified in dBm). LTE Series User's Guide 169
  • ZyXEL LTE7480-S905 | User Guide - Page 170
    Kingdom United States of America (LTE7461-M602 and LTE7480-S905) ISO 3166 2 LETTER CODE LI LT installed and used according to the instructions, may cause harmful interference to in conjunction with any other antenna or transmitter. (LTE7480-S905) This transmitter must be at least 20 cm from
  • ZyXEL LTE7480-S905 | User Guide - Page 171
    d'inclinaison nécessaires pour rester conforme à l'exigence de la p.i.r.e. applicable au masque d'élévation, énoncée à la section 6.2.2.3 du CNR-247, doivent être clairement indiqués. LTE Series User's Guide 171
  • ZyXEL LTE7480-S905 | User Guide - Page 172
    that no one will step on them or stumble over them. • Always disconnect all cables from this Zyxel Device before servicing or disassembling. • Do not remove the plug and connect it to a power outlet by itself; genom att göra dig av med den på ett återvinningsställe. LTE Series User's Guide 172
  • ZyXEL LTE7480-S905 | User Guide - Page 173
    . The meaning of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents. LTE Series User's Guide 173
  • ZyXEL LTE7480-S905 | User Guide - Page 174
    authorized Zyxel local Zyxel discretion of Zyxel. This warranty Zyxel shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services zyxel.com. To obtain the source code covered under those Licenses, please contact [email protected]
  • ZyXEL LTE7480-S905 | User Guide - Page 175
    Index Index A access troubleshooting 150 Access Control (Rules) screen 92 activation firewalls 89 Add New ACL Rule screen 93 85 contact information 156 copyright 168 Create Certificate Request screen 102 creating certificates 102 customer support 156 customized service LTE Series User's Guide 175
  • ZyXEL LTE7480-S905 | User Guide - Page 176
    direction of travel 96 firewalls 88, 89 actions 95 configuration 89 customized services 91, 92 DoS 88 thresholds 89 ICMP 88 rules 96 security 97 firmware version check 143 FTP 75 unusable 152 H hardware connections troubleshooting 150 I E e-mail log setting 141 F factory-default User's Guide 176
  • ZyXEL LTE7480-S905 | User Guide - Page 177
    Local Certificates screen 101 Log Setting screen 139 login 17 passwords 17 troubleshooting 150 Login screen no access 151 logs 110, 113, 121, good habits 14 using FTP. See FTP. MGMT Services screen 129, 130 MSN Messenger problem 153 Multi_WAN Remote Management 130 N NAT default server 82 Guide 177
  • ZyXEL LTE7480-S905 | User Guide - Page 178
    78 ports 14 power troubleshooting 150 problem troubleshooting 150 Protocol (Customized Services) screen 91 Protocol Entry service access control 129, 130, 131 setup firewalls 89 static route 85 SIM card status 122 Telnet unusable 152 thresholds DoS 89 time 133 Trace Route test 148 troubleshooting
  • ZyXEL LTE7480-S905 | User Guide - Page 179
    warranty 174 note 174 Web Configurator easy access 61 login 17 passwords 17 wireless LAN status 30 wizard setup Internet 24 Index LTE Series User's Guide 179
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Default Login Details
User’s Guide
LTE7461-M602 & LTE7480-S905
Copyright © 2019 Zyxel Communications Corporation
LAN IP Address
Login
admin
Password
See the Zyxel Device label
Version 2.00 Ed 2, 9/2019