ZyXEL P-660R-T1 v3 User Guide

ZyXEL P-660R-T1 v3 Manual

Get ZyXEL P-660R-T1 v3 PDF manuals and user guides View all ZyXEL P-660R-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL P-660R-T1 v3 manual content summary:

  • ZyXEL P-660R-T1 v3 | User Guide - Page 1
    P-660R-Tx v3 ADSL2+ Access Router User's Guide Version 3.40 1/2009 Edition 2 DEFAULT LOGIN IP Address http://192.168.1.1 User Name admin Password 1234 www.zyxel.com
  • ZyXEL P-660R-T1 v3 | User Guide - Page 2
  • ZyXEL P-660R-T1 v3 | User Guide - Page 3
    Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 300, Taiwan. E-mail: [email protected] Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact
  • ZyXEL P-660R-T1 v3 | User Guide - Page 4
    in this book may differ slightly from the product due to differences in operating systems, operating system versions, or if you installed updated firmware/software for your device. Every effort has been made to ensure that the information in this manual is accurate. 4 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 5
    things you may need to configure or helpful tips) or recommendations. Syntax Conventions • The P-660R-Tx v3 may be referred to as the "ZyXEL Device", the "device", the "system" or the "product" in this User's Guide. • Product labels, screen names, field labels and field choices are all in bold font
  • ZyXEL P-660R-T1 v3 | User Guide - Page 6
    Document Conventions Icons Used in Figures Figures in this User's Guide may use the following generic icons. The ZyXEL Device icon is not an exact representation of your device. ZyXEL Device Computer Notebook computer Server Firewall Telephone Router Switch 6 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 7
    will step on them or stumble over them. • Always disconnect all cables from this device before servicing or disassembling. • Use ONLY an appropriate power adaptor or cord for your device. • Connect Used electrical and electronic equipment should be treated separately. P-660R-Tx v3 User's Guide 7
  • ZyXEL P-660R-T1 v3 | User Guide - Page 8
    Safety Warnings 8 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 9
    ...25 Introducing the ZyXEL Device 27 Introducing the 75 Static Route ...77 Network Address Translation (NAT 81 Quality of Service (QoS) ...91 ADSL ...99 Firewall ...101 Access Management ...103 ...139 Firmware ...141 System Restart ...149 Diagnostic ...151 P-660R-Tx v3 User's Guide 9
  • ZyXEL P-660R-T1 v3 | User Guide - Page 10
    Contents Overview Troubleshooting and Product Specifications 153 Troubleshooting ...155 Product Specifications ...159 Appendices and Index ...165 10 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 11
    1 Introducing the ZyXEL Device 27 1.1 Overview ...27 1.2 Ways to Manage the ZyXEL Device 27 1.3 Good Habits for Managing the ZyXEL Device 28 1.4 Applications for the ZyXEL Device 28 1.4.1 2.2.1 Navigation Panel ...33 2.2.2 Main Window ...34 Part II: Status 35 P-660R-Tx v3 User's Guide 11
  • ZyXEL P-660R-T1 v3 | User Guide - Page 12
    56 7.2.2 Static IP Address ...58 7.2.3 PPPoA/PPPoE ...60 7.2.4 Bridge Mode ...62 7.2.5 The PVCs Summary Screen 62 7.3 WAN Technical Reference 63 7.3.1 Encapsulation ...63 7.3.2 Multiplexing ...64 12 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 13
    68 8.2.1 The DHCP IP Pool Summary Screen 70 8.3 LAN Technical Reference ...71 8.3.1 LANs, WANs and the ZyXEL Device 71 8.3.2 DHCP Setup ...71 8.3.3 DNS Server Addresses 72 8.3.4 LAN TCP/IP ...72 8.3.5 RIP Server Screen 85 10.5 The IP Address Mapping Screen 86 P-660R-Tx v3 User's Guide 13
  • ZyXEL P-660R-T1 v3 | User Guide - Page 14
    NAT Definitions ...88 10.6.2 What NAT Does ...89 10.6.3 How NAT Works ...89 Chapter 11 Quality of Service (QoS)...91 11.1 Overview ...91 11.1.1 What You Can Do in the QoS Screens 92 11.1.2 What You the Access Control Setup Screen 106 Chapter 15 Filters ...109 14 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 15
    Screen 112 15.4 The URL Filter Screen ...113 Chapter 16 SNMP...115 16.1 Overview ...115 16.1.1 Supported MIBs ...116 16.2 The SNMP Screen ...116 Chapter 17 Universal Plug-and-Play (UPnP 117 17.1 Overview ...137 20.1 Overview ...137 20.2 The Administrator Screen 137 P-660R-Tx v3 User's Guide 15
  • ZyXEL P-660R-T1 v3 | User Guide - Page 16
    156 25.3 Internet Access ...157 Chapter 26 Product Specifications ...159 26.1 Hardware Specifications 159 26.2 Firmware Specifications 159 26.3 Power Adaptor Specifications 162 Part IX: Appendices and Index 165 Appendix A Setting up Your Computer's IP Address 167 16 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 17
    Table of Contents Appendix B Pop-up Windows, JavaScripts and Java Permissions 189 Appendix C IP Addresses and Subnetting 197 Appendix D Services ...205 Appendix E Legal Information 209 Index...213 P-660R-Tx v3 User's Guide 17
  • ZyXEL P-660R-T1 v3 | User Guide - Page 18
    Table of Contents 18 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 19
    List of Figures List of Figures Figure 1 ZyXEL Device's Router Features 28 Figure 2 LEDs on the Top of the Device 29 Figure 3 Login Screen ...32 Figure 4 Main Screen ... Advanced Setup > NAT > Virtual Server 85 Figure 38 Advanced Setup > NAT > IP Address Mapping 87 P-660R-Tx v3 User's Guide 19
  • ZyXEL P-660R-T1 v3 | User Guide - Page 20
    Networking Components Wizard 121 Figure 57 Networking Services ...121 Figure 58 Network Connections ...122 73 FTP Session Example of Firmware File Upload 144 Figure 74 FTP Session Example ...145 Figure 75 Maintenance > Firmware ...146 Figure 76 Maintenance ...171 20 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 21
    Content Security 195 Figure 120 Network Number and Host ID 198 Figure 121 Subnetting Example: Before Subnetting 200 Figure 122 Subnetting Example: After Subnetting 201 P-660R-Tx v3 User's Guide 21
  • ZyXEL P-660R-T1 v3 | User Guide - Page 22
    List of Figures 22 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 23
    35 Access Management > Filter (Application 112 Table 36 Access Management > Filter (URL 113 Table 37 Access Management > SNMP 116 Table 38 Access Management > UPnP 118 P-660R-Tx v3 User's Guide 23
  • ZyXEL P-660R-T1 v3 | User Guide - Page 24
    149 Table 47 Hardware Specifications ...159 Table 48 Firmware Specifications ...159 Table 49 Standards Supported ...161 Table 50 ZyXEL Device Series Power Adaptor Specifications 162 Table 51 Network Number Subnet Planning 203 Table 62 Examples of Services ...205 24 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 25
    PART I Introduction Introducing the ZyXEL Device (27) Introducing the Web Configurator (31) 25
  • ZyXEL P-660R-T1 v3 | User Guide - Page 26
    26
  • ZyXEL P-660R-T1 v3 | User Guide - Page 27
    troubleshooting by service engineers. • FTP for firmware upgrades and configuration backup/restore. • SNMP. The device can be monitored by an SNMP manager. See the SNMP chapter in this User's Guide. • TR-069. This is an auto-configuration server used to remotely configure your device. P-660R-Tx v3
  • ZyXEL P-660R-T1 v3 | User Guide - Page 28
    jack. Computers can connect to the ZyXEL Device's LAN ports. Figure 1 ZyXEL Device's Router Features LAN DSL You can also configure firewall and content filtering on the ZyXEL Device for secure Internet access. you could block access to certain web sites for the kids. 28 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 29
    to make an IP connection but failed. Possible causes are no response from a DHCP server, no PPPoE response, PPPoE authentication failed. Off The ZyXEL Device does not have an IP connection. Refer to the Quick Start Guide for information on hardware connections. P-660R-Tx v3 User's Guide 29
  • ZyXEL P-660R-T1 v3 | User Guide - Page 30
    Chapter 1 Introducing the ZyXEL Device 1.6 The RESET Button If you forget your password or cannot access the web configurator, you will need to use the and then release it. When the POWER LED begins to blink, the defaults have been restored and the device restarts. 30 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 31
    enabled by default in Windows XP SP (Service Pack) 2. • JavaScripts (enabled by default ZyXEL Device, enter the username (admin by default) and password (1234 by default) in the login screen and click OK. If you have changed the password, enter your password and click OK. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 32
    Introducing the Web Configurator Figure 3 Login Screen " For security reasons, the ZyXEL Device automatically logs you out if you do not use the web configurator for above, the main screen is divided into these parts: • A - navigation panel • B - main window 32 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 33
    ADSL settings on your ZyXEL Device. Firewall Use this screen to activate/deactivate the firewall and/or SPI on your ZyXEL Device. Access Management ACL Use this screen to determine which application can access which ZyXEL Device interface from which computers. P-660R-Tx v3 User's Guide 33
  • ZyXEL P-660R-T1 v3 | User Guide - Page 34
    change your ZyXEL Device's time and date. Firmware Use this screen to manage configuration files and upload firmware to your device. SysRestart This screen allows you to reboot the ZyXEL Device without 3 on page 37 for more information about the Status screen. 34 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 35
    PART II Status Device Information (37) System Logs (39) Traffic Statistics (41) 35
  • ZyXEL P-660R-T1 v3 | User Guide - Page 36
    36
  • ZyXEL P-660R-T1 v3 | User Guide - Page 37
    current status of the device, system resources, and interfaces (LAN and WAN). 3.2 The Device Info Screen Use this screen to view the status of the ZyXEL Device. Click Status > Device Info to open the following screen. Figure 5 Status > Device Information P-660R-Tx v3 User's Guide 37
  • ZyXEL P-660R-T1 v3 | User Guide - Page 38
    ) between the power received at the near-end and that transmitted from the far-end. Data Rate This is speed of data transfer on your ZyXEL Device. 38 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 39
    The following table describes the fields in this screen. Table 4 Status > System Log LABEL DESCRIPTION System Log This field displays the log messages of your ZyXEL Device. P-660R-Tx v3 User's Guide 39
  • ZyXEL P-660R-T1 v3 | User Guide - Page 40
    Chapter 4 System Logs Table 4 Status > System Log LABEL DESCRIPTION CLEAR LOG Click this to delete all the logs. SAVE LOG Click this to save the logs in a text file. 40 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 41
    information about viewing traffic statistics of your ZyXEL Device. 5.2 The Statistics Screen Use this screen to check the traffic statistics of your ZyXEL Device. Click Status > Statistics to open Frames This field displays the number of received frames on this port. P-660R-Tx v3 User's Guide 41
  • ZyXEL P-660R-T1 v3 | User Guide - Page 42
    . PDUs Receive total This field displays the number of error counts received on this port. Error Counts REFRESH Click this to update the screen. 42 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 43
    PART III Quick Start Wizard Quick Start Wizard (45) 43
  • ZyXEL P-660R-T1 v3 | User Guide - Page 44
    44
  • ZyXEL P-660R-T1 v3 | User Guide - Page 45
    to access the web configurator, click Quick Start > Quick Start from the navigation panel to go to the wizard screens. Figure 9 Access Quick Start Wizard P-660R-Tx v3 User's Guide 45
  • ZyXEL P-660R-T1 v3 | User Guide - Page 46
    old one if you don't want to change it. Type the new or old password in both fields and click NEXT. Figure 12 Password 46 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 47
    Chapter 6 Quick Start Wizard 5 Select the time zone for your location and click NEXT. Figure 13 Time Zone 6 Select the connection type supported by your ISP and click NEXT. Figure 14 ISP Connection Type 7 The next wizard screen varies depending on what connection type you use. Configure the
  • ZyXEL P-660R-T1 v3 | User Guide - Page 48
    previous screen without saving. NEXT Click this to continue to the next wizard screen. EXIT Click this to close the wizard screen without saving. 48 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 49
    your ISP assigned. If assigned a name in the form user@domain where domain identifies a service name, then enter both components exactly as given. Password Enter the password associated with the the wizard screen without saving. Figure 18 ISP Connection: Bridge Mode P-660R-Tx v3 User's Guide 49
  • ZyXEL P-660R-T1 v3 | User Guide - Page 50
    . Refer to the rest of this guide for more detailed information on the complete range of ZyXEL Device features. If you cannot access the Internet, open the web configurator again to confirm that the Internet settings you configured in the wizard setup are correct. 50 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 51
    PART IV Interface Setup Internet Setup (53) LAN Setup (67) 51
  • ZyXEL P-660R-T1 v3 | User Guide - Page 52
    52
  • ZyXEL P-660R-T1 v3 | User Guide - Page 53
    Use these screens to configure your ZyXEL Device for Internet access. A WAN 7.2 on page 55) to configure the WAN settings on the ZyXEL Device for Internet access. • Use the PVCs Summary screen use the same encapsulation method used by your Internet Service Provider (ISP). If your ISP offers a dial-
  • ZyXEL P-660R-T1 v3 | User Guide - Page 54
    assigned by the ISP each time the ZyXEL Device tries to access the Internet. high QoS (Quality of Service) can be guaranteed. QoS is a service agreement that guarantees certain is still in wide use. IGMP version 3 supports source filtering, reporting or ignoring traffic from 660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 55
    -down list box. PVCs Summary Click this to display a summary table of the PVC settings on your ZyXEL Device. See Section 7.2.5 on page 62 for more details. Status Use this field to enable or disable assigned to you. Refer to the appendix for more information. QoS P-660R-Tx v3 User's Guide 55
  • ZyXEL P-660R-T1 v3 | User Guide - Page 56
    the peak rate. Type the MBS, which is less than 65535. Encapsulation Select the connection type supported by your ISP. The next fields vary depending on what connection type you use. See the following screen. Figure 22 Interface Setup > Internet (Dynamic IP) 56 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 57
    Information Protocol) allows a router to exchange routing information with other routers. Select the RIP version a multicast group. The ZyXEL Device supports IGMP v1, IGMP v2 and IGMP v3. Select Disabled to turn off ZyXEL Device can establish connections to the network. P-660R-Tx v3 User's Guide 57
  • ZyXEL P-660R-T1 v3 | User Guide - Page 58
    The Maximum Transmission Unit (MTU) defines the size of the largest packet allowed on an interface or connection. Enter the MTU in this field. 58 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 59
    Information Protocol) allows a router to exchange routing information with other routers. Select the RIP in a multicast group. The ZyXEL Device supports IGMP v1, IGMP v2 and IGMP v3. Select Disabled to turn off ZyXEL Device can establish connections to the network. P-660R-Tx v3 User's Guide 59
  • ZyXEL P-660R-T1 v3 | User Guide - Page 60
    Interface Setup > Internet (PPPoA/PPPoE) LABEL DESCRIPTION PPPoE/PPPoA Servicename Type the name of your service in this field. Username Enter the username exactly as your ISP assigned. If assigned a name in : PPPoE LLC, PPPoE VC-Mux, PPPoA LLC and PPPoA VCMux. 60 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 61
    timeout. Select Connect Manually to establish the connection company offers flat-rate service or you need a router to exchange routing information with other routers ZyXEL Device supports IGMP v1, IGMP v2 and IGMP v3 ZyXEL Device can establish connections to the network. P-660R-Tx v3 User's Guide 61
  • ZyXEL P-660R-T1 v3 | User Guide - Page 62
    PVC. Active This field displays whether the PVC is activated. VPI This field displays the VPI value. VCI This field displays the VCI value. 62 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 63
    ZyXEL Device supports Point-to-Point Protocol over Ethernet (PPPoE). PPPoE is an IETF Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPPoE option is for a dial-up connection using PPPoE. For the service
  • ZyXEL P-660R-T1 v3 | User Guide - Page 64
    field and not the Gateway IP Address field. IP Assignment with RFC 1483 Encapsulation In this case the IP address assignment must be static. 64 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 65
    where the connection is always up regardless of traffic demand. The ZyXEL Device does two things when you specify an always-on connection. always-on connection unless your telephone company offers flat-rate service or you need a constant connection and the cost is of no 660R-Tx v3 User's Guide 65
  • ZyXEL P-660R-T1 v3 | User Guide - Page 66
    transfers. However, UBR doesn't guarantee any bandwidth and only delivers traffic when the network has spare bandwidth. An example application is background file transfer. 66 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 67
    to set the LAN IP address and subnet mask of your ZyXEL device. You can also edit your ZyXEL Device's RIP, multicast and DHCP settings from this screen. network. Every networking device (including computers, servers, routers, printers, etc.) needs an IP address to 660R-Tx v3 User's Guide 67
  • ZyXEL P-660R-T1 v3 | User Guide - Page 68
    your ZyXEL Device. 2 Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it is best to leave this alone, the configurator will automatically compute a subnet mask based upon the IP address you entered. 3 Click SAVE to save your settings. 68 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 69
    . If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays DHCP requests and responses between the remote server and the clients. DHCP Server Starting IP Address This field specifies the first of the contiguous addresses in the IP address pool. P-660R-Tx v3 User's Guide 69
  • ZyXEL P-660R-T1 v3 | User Guide - Page 70
    a summary table for the IP address pool. See Section 8.2.1 on page 70 for more details. The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP clients (DHCP Pool). See the following screen. Figure 29 Interface Setup > LAN > DHCP IP Pool Summary 70 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 71
    the ZyXEL Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 72
    conveyed through IPCP negotiation. The ZyXEL Device supports the IPCP DNS server extensions through the DNS proxy feature. If the administrator assigns you a block of registered IP addresses, follow their instructions in selecting the IP addresses and the subnet mask. If the P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 73
    not send any RIP packets but will accept all RIP packets received. • Out Only - the ZyXEL Device will send out RIP packets but will not accept any RIP packets received. • None - the ZyXEL Device will not send any RIP packets and will ignore any RIP packets received. P-660R-Tx v3 User's Guide 73
  • ZyXEL P-660R-T1 v3 | User Guide - Page 74
    to participate in IGMP. The address 224.0.0.2 is assigned to the multicast routers group. The ZyXEL Device supports IGMP version 1 (IGMP-v1), IGMP version 2 (IGMP-v2) and IGMP version 3 (IGMP-v3). At start up, the ZyXEL Device queries all directly connected networks to gather group membership. After
  • ZyXEL P-660R-T1 v3 | User Guide - Page 75
    PART V Advanced Setup Static Route (77) Network Address Translation (NAT) (81) Quality of Service (QoS) (91) ADSL (99) Firewall (101) 75
  • ZyXEL P-660R-T1 v3 | User Guide - Page 76
    76
  • ZyXEL P-660R-T1 v3 | User Guide - Page 77
    9.1.1 What You Can Do in the Static Route Screens • Use the Routing Table List screen (Section 9.2 on page 78) to view static routes on the ZyXEL Device. • Use the Static Route screen (Section 9.2.1 on page 78) to add or edit IP static routes on the ZyXEL Device. P-660R-Tx v3 User's Guide 77
  • ZyXEL P-660R-T1 v3 | User Guide - Page 78
    is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN destinations. Metric This field displays the priority of each route on the ZyXEL Device. Device This is the name that describes or identifies this route P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 79
    about the static route to other routers. SAVE Click this to save your changes. DELETE Click this to remove the static route. BACK Click this to return to the previous screen without saving. CANCEL Click this to restore your previously saved settings. P-660R-Tx v3 User's Guide 79
  • ZyXEL P-660R-T1 v3 | User Guide - Page 80
    Chapter 9 Static Route 80 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 81
    configure NAT on the ZyXEL Device. NAT (Network Address page 84) to forward incoming service requests to the server(s) on your local network. • host is located relative to the ZyXEL Device, for example, the computers in a packet as the packet traverses a router, for example, the local address refers to
  • ZyXEL P-660R-T1 v3 | User Guide - Page 82
    IP is a ZyNOS implementation of a subset of NAT that supports two types of mapping, Many-to-One and Server. The ZyXEL Device also supports multiple IPs to map multiple public IP addresses to multiple private Section 7.2 on page 55 for more details on activating NAT. 82 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 83
    Virtual Server Click this to configure port forwarding rules for your ZyXEL Device. See Section 10.4 on page 84 for more to the outside world (while still being protected from DoS (Denial of Service) attacks such as SYN flooding and Ping of Death). These public servers 660R-Tx v3 User's Guide 83
  • ZyXEL P-660R-T1 v3 | User Guide - Page 84
    accessed directly from the WAN. Use this screen to allow the ZyXEL Device to forward traffic to the servers on the LAN. You cases, such as for unknown services or where one server can support more than one service (for example both FTP and web service), it might be better to 660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 85
    Use the drop-down list box to select the type of server you have on your network. Applications or services are defined by their protocol (TCP or UDP) and port number. For example, TCP port 80 defines web to choose the IP port (ALL, TCP or UDP) that defines your service. P-660R-Tx v3 User's Guide 85
  • ZyXEL P-660R-T1 v3 | User Guide - Page 86
    a service. End Port This is the last port number that identifies a service. ZyXEL Device applies the rules in the order that you specify. When a rule matches the current packet, the ZyXEL Device takes the corresponding action and the remaining rules are ignored. 86 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 87
    IP addresses to one public IP address. This is equivalent to the Single IP feature that previous ZyXEL routers supported only. Many-to-Many Overload: This mode maps multiple local IP addresses to shared public IP for One-to-One, Many-to-One and Server mapping types. P-660R-Tx v3 User's Guide 87
  • ZyXEL P-660R-T1 v3 | User Guide - Page 88
    the Single IP feature that previous ZyXEL routers supported only. M-M Ov (Overload): to specify inside servers of different services behind the NAT to be accessible located relative to the ZyXEL Device, for example, in a packet as the packet traverses a router, for example, the local address refers to
  • ZyXEL P-660R-T1 v3 | User Guide - Page 89
    additional benefit of firewall protection. With no servers defined, your ZyXEL Device filters out all incoming inquiries, thus preventing intruders from probing in each packet and then forwards it to the Internet. The ZyXEL Device keeps track of the original addresses and port numbers so incoming
  • ZyXEL P-660R-T1 v3 | User Guide - Page 90
    192.168.1.12 192.168.1.13 Inside Public IP Address 1 2 3 4 SA 1 WAN Inside Local Address 192.168.1.11 192.168.1.10 Inside Public Address 90 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 91
    IP (VoIP) or Internet gaming, and those for which jitter alone is a problem such as Internet radio or streaming video. In the following figure, your Internet connection on the ZyXEL Device. Figure 40 QoS Example VoIP: Queue 6 Boss: Queue 5 IP=192.168.1.23 DSL 50 Mbps P-660R-Tx v3 User's Guide 91
  • ZyXEL P-660R-T1 v3 | User Guide - Page 92
    Service (QoS) 11.1.1 What You Can Do in the QoS Screens • Use the QoS screen (Section 11.2 on page 93) to configure QoS settings on the ZyXEL rules and actions you configured for the ZyXEL Device. 11.1.2 What You Need to switch, can provide specific treatment or service based on the tag or marker.
  • ZyXEL P-660R-T1 v3 | User Guide - Page 93
    Chapter 11 Quality of Service (QoS) 11.2 The QoS Screen Use this screen to enable or disable QoS and have the ZyXEL Device assign priority levels to traffic according to the port range, IEEE 802. the QoS settings. See Section 11.2.1 on page 95 for more details. Rule P-660R-Tx v3 User's Guide 93
  • ZyXEL P-660R-T1 v3 | User Guide - Page 94
    VLAN ID in this field. IPP/DS Field Select IPP/TOS to specify an IP precedence range and type of services. Select DSCP to specify a DiffServ Code Point (DSCP) range. IP Precedence Enter a range from 0 to (0 to 7) to re-assign the priority level to matched traffic. 94 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 95
    Chapter 11 Quality of Service (QoS) Table 27 Advanced Setup > QoS LABEL Screen Use this screen to display a summary of rules and actions configured for the ZyXEL Device. In the Advanced > QoS screen, click the QoS Settings Summary button .1p priority level. Actions P-660R-Tx v3 User's Guide 95
  • ZyXEL P-660R-T1 v3 | User Guide - Page 96
    Service (QoS) Table 28 Advanced Setup > QoS > QoS Settings Summary (continued) LABEL DESCRIPTION IPP/TOS (DSCP) The ZyXEL Device re-assigns the priority values specified in this field to Remarking matched traffic. 802.1p Remarking The ZyXEL traffic such as router configuration messages. Level
  • ZyXEL P-660R-T1 v3 | User Guide - Page 97
    Quality of Service (QoS) 11.3.3 Automatic Priority Queue Assignment If you enable QoS on the ZyXEL Device, the ZyXEL Device can 5 3 011110
  • ZyXEL P-660R-T1 v3 | User Guide - Page 98
    Chapter 11 Quality of Service (QoS) 98 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 99
    selects the best compatible one for your connection. Other options are ADSL2+, ADSL2, G.DMT, T1.413 and G.lite. ADSL Type Select the type supported by your ISP. Available options are ANNEX A, ANNEX A/L, ANNEX M and ANNEX A/L/M. SAVE Click this to save your changes. P-660R-Tx v3 User's Guide 99
  • ZyXEL P-660R-T1 v3 | User Guide - Page 100
    Chapter 12 ADSL 100 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 101
    network resources. The ZyXEL Device is pre-configured to automatically detect and thwart all known DoS attacks. DDoS A DDoS attack is one in which multiple compromised systems attack a single target, thereby causing denial of service for users of the targeted system. P-660R-Tx v3 User's Guide 101
  • ZyXEL P-660R-T1 v3 | User Guide - Page 102
    or disable SPI on your ZyXEL Device. SAVE Click this to save your changes. CANCEL Click this to restore your previously saved settings. 1 Enabling SPI blocks all traffic initiated from the WAN side, including the DMZ, virtual server and ACL on the WAN side. 102 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 103
    PART VI Access Management Access Control (105) Filters (109) SNMP (115) Universal Plug-and-Play (UPnP) (117) Dynamic DNS Setup (129) CWMP (131) 103
  • ZyXEL P-660R-T1 v3 | User Guide - Page 104
    104
  • ZyXEL P-660R-T1 v3 | User Guide - Page 105
    Access Control LAN WAN HTTP Telnet 14.1.1 The Access Control Setup Screen Use this screen to configure from where and how users may access the ZyXEL Device. 14.1.2 Access Control Interfaces You may manage your ZyXEL Device via: • WAN • LAN • Both (LAN and WAN) P-660R-Tx v3 User's Guide 105
  • ZyXEL P-660R-T1 v3 | User Guide - Page 106
    an administrator to send SNMP commands, select SNMP. • If you want to allow a user to find the ZyXEL Device on the network (for troubleshooting purposes, for example), select Ping. • Select ALL to allow access for all services. You cannot select a combination of services. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 107
    . Select Both for access via either port. If you configure 0.0.0.0 ~ 0.0.0.0 Secure IP Address, ALL services and WAN interface, you will not be able to access the device at all from the LAN unless it. CANCEL Click this to restore your previously saved settings. P-660R-Tx v3 User's Guide 107
  • ZyXEL P-660R-T1 v3 | User Guide - Page 108
    Chapter 14 Access Control 108 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 109
    CHAPTER 15 Filters 15.1 Overview This chapter introduces three types of filters supported by the ZyXEL Device. You can configure rules to restrict traffic by IP addresses, MAC type in the address bar of your Internet browser, for example "http://www.zyxel.com". P-660R-Tx v3 User's Guide 109
  • ZyXEL P-660R-T1 v3 | User Guide - Page 110
    the PVC to which to apply the filter. Direction Apply the filter to Both, Incoming or Outgoing traffic direction. IP/MAC Filter Rule Editing 110 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 111
    This is the destination port number. Protocol This is the upper layer protocol. Unmatched When a packet doesn't match the rule, this is the action the ZyXEL Device takes on the packet. SAVE Click this to save your changes. DELETE Click this to remove the filter rule. CANCEL Click this to
  • ZyXEL P-660R-T1 v3 | User Guide - Page 112
    to allow or deny transferring RealPlayer format files. SAVE Click this to save your changes. CANCEL Click this to restore your previously saved settings. 112 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 113
    Select the index number of the filter. URL Enter the URL for the ZyXEL Device to block. URL Filter Listing Index This is the index number of the filter rule. URL This is the URL you have configured the ZyXEL Device to block. SAVE Click this to save your changes. DELETE Click this
  • ZyXEL P-660R-T1 v3 | User Guide - Page 114
    Chapter 15 Filters 114 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 115
    protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL Device supports SNMP version one agents to communicate for the purpose of accessing these objects. P-660R-Tx v3 User's Guide 115
  • ZyXEL P-660R-T1 v3 | User Guide - Page 116
    . • Set - Allows the manager to set values for object variables within an agent. 16.1.1 Supported MIBs The ZyXEL Device supports MIB II, which is defined in RFC-1213 and RFC-1215. The focus of the MIBs is allows all requests. Apply Click this to save your changes. 116 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 117
    UPnP on the ZyXEL Device and allow UPnP-enabled applications to automatically configure the ZyXEL Device. 17 of simple product and service descriptions. NAT traversal an example of an application that supports NAT traversal and UPnP. See the in establishing their own services and opening firewall ports
  • ZyXEL P-660R-T1 v3 | User Guide - Page 118
    and ZyXEL ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum UPnP™ Implementers Corp. (UIC). ZyXEL's UPnP implementation supports to manually configure port forwarding for the UPnP enabled application. SAVE Click this to save your changes. 118 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 119
    Programs. 2 Click on the Windows Setup tab and select Communication in the Components selection box. Click Details. Figure 53 Add/Remove Programs: Windows Setup: Communication P-660R-Tx v3 User's Guide 119
  • ZyXEL P-660R-T1 v3 | User Guide - Page 120
    . 2 Double-click Network Connections. 3 In the Network Connections window, click Advanced in the main menu and select Optional Networking Components .... Figure 55 Network Connections 120 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 121
    window displays. Select Networking Service in the Components selection box and click Details. Figure 56 Windows Optional Networking Components Wizard 5 In the Networking Services window, select the Universal Plug and Play check box. Figure 57 Networking Services P-660R-Tx v3 User's Guide 121
  • ZyXEL P-660R-T1 v3 | User Guide - Page 122
    your computer and the ZyXEL Device. Auto-discover Your UPnP-enabled Network Device 1 Click Start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway. 2 Right-click the icon and select Properties. Figure 58 Network Connections 122 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 123
    Chapter 17 Universal Plug-and-Play (UPnP) 3 In the Internet Connection Properties window, click Settings to see the port mappings there were automatically created. Figure 59 Internet Connection Properties P-660R-Tx v3 User's Guide 123
  • ZyXEL P-660R-T1 v3 | User Guide - Page 124
    Play (UPnP) 4 You may edit or delete the port mappings or click Add to manually add port mappings. Figure 60 Internet Connection Properties: Advanced Settings Figure 61 Internet Connection Properties from your computer, all port mappings will be deleted automatically. 124 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 125
    the ZyXEL Device first. This comes helpful if you do not know the IP address of the ZyXEL Device. Follow the steps below to access the web configurator. 1 Click Start and then Control Panel. 2 Double-click Network Connections. 3 Select My Network Places under Other Places. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 126
    Chapter 17 Universal Plug-and-Play (UPnP) Figure 64 Network Connections 4 An icon with the description for each UPnP-enabled device displays under Local Network. 126 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 127
    . Figure 65 Network Connections: My Network Places 6 Right-click on the icon for your ZyXEL Device and select Properties. A properties window displays with basic information about the ZyXEL Device. Figure 66 Network Connections: My Network Places: Properties: Example P-660R-Tx v3 User's Guide 127
  • ZyXEL P-660R-T1 v3 | User Guide - Page 128
    Chapter 17 Universal Plug-and-Play (UPnP) 128 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 129
    server that would still like to have a domain name. The Dynamic DNS service provider will give you a password or key. 18.1.1 What You Can Do 130) to enable DDNS and configure the DDNS settings on the ZyXEL Device. 18.1.2 What You Need To Know About DDNS DYNDNS Wildcard P-660R-Tx v3 User's Guide 129
  • ZyXEL P-660R-T1 v3 | User Guide - Page 130
    DNS. Service Provider This is the name of your Dynamic DNS service provider. My Host Name Type the domain name assigned to your ZyXEL Device by to you. Wildcard support Use this field to enable or disable DynDNS Wildcard. SAVE Click this to save your changes. 130 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 131
    settings, perform firmware upgrades as well as monitor and diagnose the ZyXEL device. In order to use CWMP, you need to configure the following steps: 1 Activate CWMP 2 Specify the URL, username and password. 3 Activate periodic inform and specify an interval value. P-660R-Tx v3 User's Guide 131
  • ZyXEL P-660R-T1 v3 | User Guide - Page 132
    management server. If the ZyXEL Device is behind a NAT router that assigns it a private IP address, you ZyXEL Device after a successful login. Path Type the IP address or domain name of the ZyXEL Device. The management server uses this path to verify the ZyXEL Device. 132 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 133
    access to the ZyXEL Device from the use this port to connect to the ZyXEL Device. You may need to alter when connecting to the ZyXEL Device. Type a user when connecting to the ZyXEL Device. Type a Activated to have the ZyXEL Device periodically send information for which the ZyXEL Device must
  • ZyXEL P-660R-T1 v3 | User Guide - Page 134
    Chapter 19 CWMP 134 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 135
    PART VII Maintenance Administrator Settings (137) Time Zone (139) Firmware (141) System Restart (149) Diagnostic (151) 135
  • ZyXEL P-660R-T1 v3 | User Guide - Page 136
    136
  • ZyXEL P-660R-T1 v3 | User Guide - Page 137
    Screen Use this screen to set a new password for your ZyXEL Device. Click Maintenance > Administraton to open the following screen. type. After you change the password, use the new password to access the ZyXEL Device. Confirm Password Type the new password again for confirmation. SAVE Click this
  • ZyXEL P-660R-T1 v3 | User Guide - Page 138
    Chapter 20 Administrator Settings 138 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 139
    PC's Clock to have the ZyXEL Device synchronize the time with your PC. Select Manually to enter the time and date manually. Time Zone Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). P-660R-Tx v3 User's Guide 139
  • ZyXEL P-660R-T1 v3 | User Guide - Page 140
    ISP/network administrator if you are unsure of this information. Date This field is only available when you want to set the time and date manually. Enter the date in this field. Time This field is only available when you want to set the time and date
  • ZyXEL P-660R-T1 v3 | User Guide - Page 141
    seen next. ftp> put firmware.bin ras This is a sample FTP session showing the transfer of the computer file "firmware.bin" to the ZyXEL Device. ftp> get rom-0 config.cfg This is a sample FTP session saving the current configuration to the computer file "config.cfg". P-660R-Tx v3 User's Guide 141
  • ZyXEL P-660R-T1 v3 | User Guide - Page 142
    trace log. *.rom Firmware Ras This is the generic name for the ZyNOS firmware *.bin on the ZyXEL Device. FTP Restrictions FTP will not work when: 1 You have disabled the FTP service in the Remote Management restart after the file transfer is complete. 142 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 143
    " to transfer files from the computer to the device, for example, "put firmware.bin ras" transfers the firmware on your computer (firmware.bin) to the device and renames it "ras". Similarly, "put config.rom in this chapter for more information on filename conventions. P-660R-Tx v3 User's Guide 143
  • ZyXEL P-660R-T1 v3 | User Guide - Page 144
    configurations that disallow TFTP and FTP over WAN. TFTP File Upload The device also supports the uploading of firmware files using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work an example TFTP command: tftp [-i] host put firmware.bin ras 144 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 145
    . This is when a user I.D. and password is automatically supplied to the server for anonymous access. Anonymous logins will work only if your ISP or service administrator has enabled this option. Normal. The server requires a unique User ID and Password to login. P-660R-Tx v3 User's Guide 145
  • ZyXEL P-660R-T1 v3 | User Guide - Page 146
    Firmware Screen Use this screen to manage configuration files and upload firmware to your ZyXEL Device. Firmware Upgrade Follow the instructions in this screen to upload firmware to your ZyXEL > Firmware to open the following screen. Figure 75 Maintenance > Firmware 146 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 147
    Maintenance > Firmware LABEL DESCRIPTION Current Firmware Version This is the present firmware version and the date created. New Firmware Location Click the ZyXEL Device's current configuration to your computer. UPGRADE Click this to begin the upload process. P-660R-Tx v3 User's Guide 147
  • ZyXEL P-660R-T1 v3 | User Guide - Page 148
    Chapter 22 Firmware 148 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 149
    the ZyXEL Device reboots. This does not affect the ZyXEL Device's configuration. Select Factory Default Settings to clear all user-defined configuration information and return the ZyXEL Device to its factory defaults. RESTART Click this to reboot the ZyXEL Device. P-660R-Tx v3 User's Guide 149
  • ZyXEL P-660R-T1 v3 | User Guide - Page 150
    Chapter 23 System Restart 150 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 151
    the ZyXEL Device. 24.2 The Diagnostic Screen Use this screen to test your connection and ping an IP address. Select the virtual circuit you want to check from the drop-down list box. Click Maintenance > Diagnostic to open the screen shown next. Figure 77 Maintenance > Diagnostic P-660R-Tx v3 User
  • ZyXEL P-660R-T1 v3 | User Guide - Page 152
    Chapter 24 Diagnostic 152 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 153
    PART VIII Troubleshooting and Product Specifications Troubleshooting (155) Product Specifications (159) 153
  • ZyXEL P-660R-T1 v3 | User Guide - Page 154
    154
  • ZyXEL P-660R-T1 v3 | User Guide - Page 155
    of the LED. See Section 1.5 on page 29. 2 Check the hardware connections. See the Quick Start Guide. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Turn the ZyXEL Device off and on. 5 If the problem continues, contact the vendor. P-660R-Tx v3 User's Guide 155
  • ZyXEL P-660R-T1 v3 | User Guide - Page 156
    , see the troubleshooting suggestions for I forgot the IP address for the ZyXEL Device. 2 ZyXEL Device with the default IP address. See Section 1.6 on page 30. 6 If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 157
    Troubleshooting Advanced Suggestions • Try to access the ZyXEL Device using another service, such as Telnet. If you can access the ZyXEL Device, check the remote management settings and firewall rules to find out why the ZyXEL Start Guide and Section 1.5 on page 29. P-660R-Tx v3 User's Guide 157
  • ZyXEL P-660R-T1 v3 | User Guide - Page 158
    Chapter 25 Troubleshooting 2 Make sure you entered your are behaving as expected. See the Quick Start Guide and Section 1.5 on page 29. 2 Turn the ZyXEL Device off and on. 3 If the problem continues, contact your ISP. V The Internet connection for some applications. 158 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 159
    the rich range of features on the ZyXEL Device. Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and use the web configurator, an FTP or a TFTP tool to put it on the ZyXEL Device. Note: Only upload firmware for your specific model! P-660R-Tx v3 User's Guide 159
  • ZyXEL P-660R-T1 v3 | User Guide - Page 160
    ZyXEL Device. You can also set the time manually. These dates and times are then used in logs. Logs Use logs for troubleshooting URL. QoS (Quality of Service) You can efficiently manage traffic Support Your device supports up to 8 Permanent Virtual Circuits (PVCs). 160 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 161
    Remote Firmware Upgrade Syslog TR-069 F4/F5 OAM The following list, which is not exhaustive, illustrates the standards supported in the ZyXEL Device. Table 49 Standards Supported STANDARD version 2 RFC 1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5 P-660R-Tx v3 User's Guide 161
  • ZyXEL P-660R-T1 v3 | User Guide - Page 162
    49 Standards Supported (continued) STANDARD 992.3 (G.dmt.bis) ITU standard (also referred to as ADSL2) that extends the capability of basic ADSL in data rates. ) 26.3 Power Adaptor Specifications Table 50 ZyXEL Device Series Power Adaptor Specifications NORTH AMERICAN 660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 163
    Chapter 26 Product Specifications Table 50 ZyXEL Device Series Power Adaptor Specifications (continued) AC Power Adapter Model 5V DC EU Switching Input Power Output Power DC 5Volts/1.0A Power Consumption 5 Watt max Safety Standards CE, GS or TUV, EN60950-1 P-660R-Tx v3 User's Guide 163
  • ZyXEL P-660R-T1 v3 | User Guide - Page 164
    Chapter 26 Product Specifications 164 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 165
    and Index " The appendices provide general information. Some details may not apply to your ZyXEL Device. Setting up Your Computer's IP Address (167) Pop-up Windows, JavaScripts and Java Permissions (189) IP Addresses and Subnetting (197) Services (205) Legal Information (209) Index (213) 165
  • ZyXEL P-660R-T1 v3 | User Guide - Page 166
    166
  • ZyXEL P-660R-T1 v3 | User Guide - Page 167
    in order to "communicate" with your network. If you manually assign IP information instead of using dynamic assignment, make sure ZyXEL Device's LAN port. Windows 95/98/Me Click Start, Settings, Control Panel and double-click the Network icon to open the Network window. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 168
    Client for Microsoft Networks from the list of network clients and then click OK. 5 Restart your computer so the changes you made take effect. 168 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 169
    you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in). P-660R-Tx v3 User's Guide 169
  • ZyXEL P-660R-T1 v3 | User Guide - Page 170
    window. 6 Click OK to close the Network window. Insert the Windows CD if prompted. 7 Turn on your ZyXEL Device and restart your computer when prompted. Verifying Settings 1 Click Start and then Run. 2 In the Run (Start in Windows 2000/NT), Settings, Control Panel. 170 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 171
    Connections (Network and Dial-up Connections in Windows 2000/NT). Figure 82 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties. P-660R-Tx v3 User's Guide 171
  • ZyXEL P-660R-T1 v3 | User Guide - Page 172
    you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. • Click Advanced. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 173
    Settings tab by clicking Add in Default gateways. • In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. • Click Add. • Repeat the
  • ZyXEL P-660R-T1 v3 | User Guide - Page 174
    DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. 174 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 175
    Dial-up Connections in Windows 2000/NT). 11 Turn on your ZyXEL Device and restart your computer (if prompted). Verifying Settings 1 Click Support tab. Windows Vista This section shows screens from Windows Vista Enterprise Version 6.0. 1 Click the Start icon, Control Panel. P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 176
    3 Click Network and Sharing Center. Figure 90 Windows Vista: Network And Internet 4 Click Manage network connections. Figure 91 Windows Vista: Network and Sharing Center 176 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 177
    . Figure 92 Windows Vista: Network and Sharing Center 6 Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. Figure 93 Windows Vista: Local Area Connection Properties P-660R-Tx v3 User's Guide 177
  • ZyXEL P-660R-T1 v3 | User Guide - Page 178
    Settings tab by clicking Add in Default gateways. • In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. • Click Add. • Repeat the
  • ZyXEL P-660R-T1 v3 | User Guide - Page 179
    Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. P-660R-Tx v3 User's Guide 179
  • ZyXEL P-660R-T1 v3 | User Guide - Page 180
    . 12 Close the Network Connections window. 13 Turn on your ZyXEL Device and restart your computer (if prompted). Verifying Settings 1 Network Connections, right-click a network connection, click Status and then click the Support tab. Macintosh OS 8/9 1 Click the Apple menu, Control Panel and double
  • ZyXEL P-660R-T1 v3 | User Guide - Page 181
    /IP 3 For dynamically assigned settings, select Using DHCP Server from the Configure: list. 4 For statically assigned settings, do the following: • From the Configure box, select Manually. P-660R-Tx v3 User's Guide 181
  • ZyXEL P-660R-T1 v3 | User Guide - Page 182
    • Type your subnet mask in the Subnet mask box. • Type the IP address of your ZyXEL Device in the Router address box. 5 Close the TCP/IP Control Panel. 6 Click Save if prompted, to save changes to dynamically assigned settings, select Using DHCP from the Configure list. 182 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 183
    Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box. • Type the IP address of your ZyXEL Device in the Router address box. 5 Click vary depending on your Linux distribution and release version. P-660R-Tx v3 User's Guide 183
  • ZyXEL P-660R-T1 v3 | User Guide - Page 184
    of the network card you wish to configure. The Ethernet Device General screen displays as shown. Figure 102 Red Hat 9.0: KDE: Ethernet Device: General 184 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 185
    configuration file with any plain text editor. • If you have a dynamic IP address, enter dhcp in the BOOTPROTO= field. The following figure shows an example. P-660R-Tx v3 User's Guide 185
  • ZyXEL P-660R-T1 v3 | User Guide - Page 186
    Shutting down interface eth0: Shutting down loopback interface: Setting network parameters: Bringing up loopback interface: Bringing up interface eth0: [OK] [OK] [OK] [OK] [OK] 186 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 187
    packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:730412 (713.2 Kb) TX bytes:1570 (1.5 Kb) Interrupt:10 Base address:0x1000 [root@localhost]# P-660R-Tx v3 User's Guide 187
  • ZyXEL P-660R-T1 v3 | User Guide - Page 188
    Appendix A Setting up Your Computer's IP Address 188 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 189
    to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your device's IP address. Disable 1 In Internet Explorer, select Tools, Internet Options, Privacy. P-660R-Tx v3 User's Guide 189
  • ZyXEL P-660R-T1 v3 | User Guide - Page 190
    following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. 2 Select Settings...to open the Pop-up Blocker Settings screen. 190 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 191
    ://". For example, http://192.168.167.1. 4 Click Add to move the IP address to the list of Allowed sites. Figure 113 Pop-up Blocker Settings P-660R-Tx v3 User's Guide 191
  • ZyXEL P-660R-T1 v3 | User Guide - Page 192
    Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). 6 Click OK to close the window. 192 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 193
    down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. 5 Click OK to close the window. Figure 116 Security Settings - Java P-660R-Tx v3 User's Guide 193
  • ZyXEL P-660R-T1 v3 | User Guide - Page 194
    versions may vary. You can enable Java, Javascripts and pop-ups in one screen. Click Tools, then click Options in the screen that appears. 194 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 195
    Appendix B Pop-up Windows, JavaScripts and Java Permissions Figure 118 Mozilla Firefox: Tools > Options Click Content.to show the screen below. Select the check boxes as shown in the following screen. Figure 119 Mozilla Firefox Content Security P-660R-Tx v3 User's Guide 195
  • ZyXEL P-660R-T1 v3 | User Guide - Page 196
    Appendix B Pop-up Windows, JavaScripts and Java Permissions 196 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 197
    own house number, each host on the network has its own unique identifying number - the host ID. Routers use the network number to send packets to the correct network, while the host ID determines to which host network number, and the fourth octet (16) is the host ID. P-660R-Tx v3 User's Guide 197
  • ZyXEL P-660R-T1 v3 | User Guide - Page 198
    with a "1" value). For example, an "8-bit mask" means that the first 8 bits of the mask are ones and the remaining 24 bits are zeroes. 198 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 199
    Notation SUBNET MASK ALTERNATIVE NOTATION LAST OCTET (BINARY) LAST OCTET (DECIMAL) 255.255.255.0 /24 0000 0000 0 255.255.255.128 /25 1000 0000 128 P-660R-Tx v3 User's Guide 199
  • ZyXEL P-660R-T1 v3 | User Guide - Page 200
    subnets; 192.168.1.0 /25 and 192.168.1.128 /25. The following figure shows the company network after subnetting. There are now two subnetworks, A and B. 200 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 201
    (Binary) 11111111.11111111.11111111. 11000000 Subnet Address: 192.168.1.0 Lowest Host ID: 192.168.1.1 Broadcast Address: 192.168.1.63 Highest Host ID: 192.168.1.62 P-660R-Tx v3 User's Guide 201
  • ZyXEL P-660R-T1 v3 | User Guide - Page 202
    Subnets SUBNET SUBNET ADDRESS FIRST ADDRESS LAST ADDRESS BROADCAST ADDRESS 1 0 1 30 31 2 32 33 62 63 3 64 65 94 95 4 96 97 126 127 202 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 203
    ) 1024 62 11 255.255.255.224 (/27) 2048 30 12 255.255.255.240 (/28) 4096 14 13 255.255.255.248 (/29) 8192 6 P-660R-Tx v3 User's Guide 203
  • ZyXEL P-660R-T1 v3 | User Guide - Page 204
    address that you entered. You don't need to change the subnet mask computed by the ZyXEL Device unless you are instructed to do otherwise. Private IP Addresses Every machine on the Internet must have a unique and RFC 1466, Guidelines for Management of IP Address Space. 204 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 205
    ) tunneling protocol uses this service. Finger is a UNIX or Internet related command that can be used to find out if a user is logged on. File Transfer Protocol, a program to enable fast transfer of files, including large files that may not be possible by e-mail. P-660R-Tx v3 User's Guide 205
  • ZyXEL P-660R-T1 v3 | User Guide - Page 206
    IMAP4 that runs over SSL. This is another popular Internet chat program. Microsoft Networks' messenger service uses this protocol. The Network Basic Input/Output System is used for communication between computers in over public networks. This is the control channel. 206 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 207
    , including mainframes, midrange systems, UNIX systems and network servers. The Simple Service Discovery Protocol supports Universal Plug-and-Play (UPnP). Secure Shell Remote Login Program. Stream Works function is to allow users to log into remote host systems. P-660R-Tx v3 User's Guide 207
  • ZyXEL P-660R-T1 v3 | User Guide - Page 208
    Table 62 Examples of Services (continued) NAME TFTP VDOLIVE PROTOCOL UDP TCP UDP PORT(S) 69 7000 userdefined DESCRIPTION Trivial File than TCP (Transmission Control Protocol). A videoconferencing solution. The UDP port number is specified in the application. 208 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 209
    the ZyXEL Device is subject to the terms and conditions of any related service providers. Trademarks ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL interference received, including interference that may cause undesired operations. P-660R-Tx v3 User's Guide 209
  • ZyXEL P-660R-T1 v3 | User Guide - Page 210
    with the instructions, may cause the services of this warranty, contact ZyXEL's Service Center ZyXEL to the corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you may also have other rights that vary from country to country. 210 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 211
    Appendix E Legal Information Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products. P-660R-Tx v3 User's Guide 211
  • ZyXEL P-660R-T1 v3 | User Guide - Page 212
    Appendix E Legal Information 212 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 213
    B backup configuration 145, 146 broadcast 54 C CBR 56, 66 P-660R-Tx v3 User's Guide Index Index CLI 27 Command Line Interface, see CLI configuration access control 132 configuration 132 D DDoS 101 DeMilitarized Zone, see DMZ Denials of Service, see DoS device information 37 ADSL 38 LAN 38 WAN 38
  • ZyXEL P-660R-T1 v3 | User Guide - Page 214
    firewalls 101 configuration 102 DDoS 101 DoS 101 LAND attack 102 Ping of Death 102 SYN attack 101 firmware 141 upgrading 143 forwarding ports 82, 84 configuration 85 example 84 FTP 27 backing up configuration 145 Transmission Unit, see MTU MBS 56, 65 metric 79 MTU 57, 58, 61 P-660R-Tx v3 User's Guide
  • ZyXEL P-660R-T1 v3 | User Guide - Page 215
    60, 63 private IP address 73 PVC 54 Q QoS 91 802.1p 94, 96 activation 93 P-660R-Tx v3 User's Guide DSCP 94 example 91 IP precedence 94, 96 priority queue 97 Quality of Service, see QoS Index R related documentation 3 remote management SNMP 115 system timeout 106 reset 30 restart 149 restoring
  • ZyXEL P-660R-T1 v3 | User Guide - Page 216
    Rate, see SCR SYN attack 101 syntax conventions 5 system backing up configuration 145 backup configuration 145 firmware 141 upgrading 143 LED 29 login 31 logs 39 passwords 31, 137 users 137 reset 30 restoring login 31 passwords 31 Wide Area Network, see WAN wizard 45 P-660R-Tx v3 User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
www.zyxel.com
P-660R-Tx v3
ADSL2+ Access Router
User’s Guide
Version 3.40
1/2009
Edition 2
DEFAULT LOGIN
IP Address
User Name
admin
Password
1234