iRobot Roomba 560 Product Manual - Page 27

Runtime Errors (continued) Roomba Roomba says.... beeps... Likely cause 11 beeps Roomba's bumper is not registering obstacles. Roomba may be stuck in one place. 12 beeps A cliff sensor is dirty or broken. Please charge Roomba. Roomba's battery is discharged. Please inspect and clean Roomba's cliff sensors. Roomba's cliff sensors are dirty. Please inspect and clean Roomba's wheels. Roomba's side wheel is stuck. Please remove and clean Roomba's brushes. Roomba's main brushes cannot turn. What to do Tap Roomba's bumper to confirm it is working properly. If this error occurs when Roomba is circling, clean wheels of hair and debris. If Roomba is in an extremely large room, use a Virtual Wall to create a smaller cleaning area. Inspect and clean Roomba's cliff sensors. Plug Roomba into the power supply or place on the Home base to charge. Wipe cliff sensors with a dry cloth. Ensure Roomba is starting with all wheels firmly on the floor. Clean wheels of hair and debris. Push them in and out and confirm that they turn freely. Ensure Roomba is starting with all wheels firmly on the floor. Remove and clean Roomba's brushes. Charging Errors (while charging) Roomba Roomba Roomba blinks... displays... says.... (models 550+) Likely cause 1 blink - Charging Roomba's battery is not Error 1. connected. 2 blinks Err2 3 blinks Err3 5 blinks Err5 6 blinks Err6 7 blinks Err7 Charging Roomba has a Error 2. charging error. Charging Roomba has a Error 3. charging error. Charging Roomba has a Error 5. charging error. Charging Roomba's battery is too Error 6. warm. Charging Roomba's battery is Error 7. not cooling. What to do Confirm that Roomba's battery pull-tab is removed. Remove the bottom cover of Roomba to remove and reinstall Roomba's battery. Let Roomba cool down for at least one hour and try charging again. Reset Roomba's software (refer to tip below) and try charging again. Reset Roomba's software (refer to tip below) and try charging again. Let Roomba cool down for at least one hour and try charging again. Let Roomba cool down for at least one hour and try charging again. Tip: T o reset Roomba's software, simultaneously hold down the two buttons above and below CLEAN for 10 seconds. This will clear all scheduled cleaning times, reset the clock and may resolve some software issues. For more detailed information, visit: www.irobot.com 27