Motorola MOTOROLA ELECTRIFY User Guide - Page 16
Select a network, Emergency calls, Cool down - manual
![]() |
View all Motorola MOTOROLA ELECTRIFY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Select a network MOTOROLA ELECTRIFY switches effortlessly between CDMA, GSM, and UMTS networks, so you can make calls worldwide. Note: To use your phone on a GSM or UMTS network, you need to insert a SIM card (see "Assemble & charge" on page 3), supplied by a GSM or UMTS network service provider abroad. To set your phone to roam globally: Find it: Touch > Settings> Wireless & networks > Mobile networks > Network Mode > Automatic To manually switch your phone to a CDMA or GSM/UMTS network, see "network mode (International)" on page 56. Emergency calls Note: Your service provider programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked. Emergency numbers vary by country. Your pre-programmed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. 1 Touch Dialer (if your phone is locked, touch Emergency Call). 14 Calls 2 Enter the emergency number. 3 Touch to call the emergency number. Note: Your mobile device can use GPS and AGPS signals to help emergency services find you. See "Location Services (GPS & AGPS)" on page 64. Cool down In very limited circumstances, such as where your phone has been exposed to extreme heat, "Cool Down" message screens will appear. To avoid possible damage to your battery and phone, you should follow these instructions until the phone is within its recommended temperature range. When your phone is in "Cool Down" mode, only emergency calls can be made.
![](/manual_guide/products/motorola-motorola-electrify-user-guide-894e211/16.png)