2010 BMW 328 Owner's Manual - Page 75

2 Button for: > Confirming selected display or set values > Calling up computer information 71 4 5 6 7 8 Calling up Check Control 77 Checking engine oil level 219 Setting the time 75 Setting the date 76 Viewing service requirement display 73 3 When the lights are on: instrument lighting brightness 95 Exiting displays The outside temperature reading and the time reappear when you press button 2 or if you make no entries within approx. 15 seconds. If required, complete the current setting first. Service requirements Units of measure Setting the units of measure You can change the units for fuel consumption, route/distance, temperature and pressure. 1. "Settings" 2. "Language/Units" The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition. The extent of service work required can be read out from the remote control by your BMW Service Advisor.< For certain maintenance operations, you can view the respective distance remaining or due date individually in the instrument cluster. 3. Select the desired menu item. 4. Select the desired unit. The settings are stored for the remote control currently in use. 1. Switch on the ignition, refer to page 54. 2. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompanied by the words "SERVICE-INFO". 3. Press button 2. Reference Mobility 73 Online Edition for Part no. 01 41 2 603 048 - © 08/09 BMW AG Communications Entertainment Navigation Driving tips Controls At a glance