1996 Buick Park Avenue Owner's Manual - Page 14

Rear Tilt Control (R):Raise the rear of the seat by pressing the switch on the left. Pressing the switch on the right lowers the rear the seat. of Press the SET button. You will hear one beep. Press one of the two MEMORY buttons within five seconds. You will hear two beeps to confirm that the mirror and seat positions have been entered into memory. Now it's set. When your Buickis in PARK (P) with the ignition on, push the memory button you stored just and the seat and mirrors will move to the set position. With the ignition OFF, the system will work in any shift lever position. To set the seat and mirror positions a second for driver, follow the previous steps, but use the other MEMORY button. M or: c rnd Mi1 5 (( n) If your Buick hasthis option, the control on the driver's door armrest looks like this: If you press the wrong MEMORY button, if there is or a third driver, the seat adjuster will still work. The EXIT button allows for easy exit from the vehicle. Push the EXIT button while in PARK with the (P) ignition on, or anytime while the ignitionis OFF and the seat will move all the way down and back. You will hear a beep when the EXIT button is pressed. You can use this memory function to save your seat and mirror adjustment settings by using following procedure. the Adjust the driver's seat to a safe and comfortable driving position. Adjust bothoutside mirrors to suit you. See "Outside Mirrors" in the Index. 1-2