1996 Buick Park Avenue Owner's Manual - Page 65

To program the system: 1. Adjust the driver's seat to a comfortable and safe driving position. Adjust both outside mirrors to suit you. See "Outside Mirrors" in the Index. 2. Press the SET button on the driver's door armrest. You will hear one beep. 3. Within five seconds, press one of the two memory buttons on the armrest. You will hear two beeps to confirm that the mirror and the seat positions are entered into memory. 4. Press the UNLOCK button on the appropriate If you prefer to program the exit seat position, which moves the seat completely down and back, follow these steps: 1. Press the SET button on the driver's door armrest. You will hear one beep. 2. Press the EXIT button on the armrest. You will hear one beep, but the seat will not move at this time. 3. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps. This personal choice feature will work only when the vehicle is in PARK (P). A beep will sound inside the vehicle when the UNLOCK button on the transmitter is pressed to move the seat and mirrors. transmitter within five seconds. You will hear two beeps. e second key transmitter can be programmed to record a different seat and mirror position by following the same steps. To turn this feature off, press SET, then UNLOCK within five seconds.