2015 Buick Encore Owner Manual - Page 15

1-8 In Brief If available, the MEM, "1," and "2" buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. These manually stored positions are referred to as Button Memory positions. The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is placed in OFF. These automatically stored positions are referred to as RKE Memory positions. See Memory Seats on page 3-6 and Vehicle Personalization on page 5-30. Heated Seats and then the off setting. Three lights indicate the highest setting and one light the lowest. See Heated Front Seats on page 3-8. Head Restraint Adjustment Do not drive until the head restraints for all occupants are installed and adjusted properly. To achieve a comfortable seating position, change the seatback recline angle as little as necessary while keeping the seat and the head restraint height in the proper position. See Head Restraints on page 3-2 and Seat Adjustment on page 3-3. If equipped, the controls are on the climate control panel. The engine must be running to operate the heated seats. Press M or L to heat the driver or passenger seat cushion and seatback. Press the control once for the highest setting. With each press of the control, the heated seat will change to the next lower setting, Second Row Seats The rear seatbacks can be folded down to increase cargo space. See Rear Seats on page 3-10.