2003 Cadillac DeVille Owner's Manual - Page 124

Memory Seat, Mirrors and Steering Wheel Your vehicle may be equipped with the memory package. The controls for these features are located on the driver's door panel, and are used to program and recall memory settings for the driver's seating positions. seating and steering wheel position can be programmed by repeating the above steps and pressing button 2 (for driver 2). Each time a memory button is pressed, a single beep will sound. Each time button 1 or 2 is pressed and released while the vehicle is in PARK (P), the memory positions will be recalled after a brief delay. If the vehicle is not in PARK (P), the memory buttons must be pressed and held to recall the stored positions. . secnnd ...A mirror, If you use the remote keyless entry transmitter to enter your vehicle, automatic seat and mirror movement will occur. The numbers on the back of the transmitters, 1 and 2, correspond to the numbers on the buttons on the door panel. When the key is placed in the ignition in OFF and you have entered the vehicle without using the remote keyless entry transmitter, the seat and mirrors will automatically adjust to the programmed position of the last driver. To stop recall movement of the memory feature at any time: press one of the power seat controls or memory buttons. Use the following steps to program each button: 1. Adjust the driver's seat (including the seatback recliner. lumbar and head restraint, both outside mirrors and the steering wheel toa comfortable position. 2. Press the SET button. 3. Within five seconds, press button 1. After a brief delay, a single beep will swnd threugh the driver's side front speaker to letyou know that the position has been stored. 2-55