2003 Cadillac DeVille Owner's Manual - Page 134

Turn and Lanechange Signals To signal a turn, move the lever all the way up or down. The lever returns automatically when the turn is complete. An arrow on the instrument panel cluster and in the outside rearview mirror will flash in the direction of the turn or lane change. Headlamp HiahILow-Beam Changer Push forward to change the headlamps from low beam to high. Pull the lever back and then release it to change from high beam to low. This light on the instrument panel cluster will be on, indicating high-beam usage. II Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. The lever returns when it's released. If the turn signal is left on, a warning chime will sound and the Driver Information Center (DIC) will display TURN SIGNAL ON after driving about a mile to remind >'QQ !Q tllr!? It Qff. Arrows that flash rapidly when signaling for a turn or lane change may be causedby a burned out signal bulb. Other drivers won't seethe turn signal. Replace burned-out bulbsto help avoid possible accidents. Check the fuse and for burned-out bulbs if the arrow fails to work when signaling a turn. See Fuses and Circuit Breakers on page 5-94. Flash-To-Pass This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use. When you do, the following will occur: the heatjl3rnps are either off nr in the Daytime Running Lamps (DRL) mode, the high-beam headlamps will turn on. They'll stay on as long as you hold the lever there. Release the lever to turn them off. If If the headlamps are on high beam, they will switch to low beam. To return to high beam, push the lever away from you. 3-9