2003 Cadillac DeVille Owner's Manual - Page 203

Tire Pressure Display This feature will allow the individual tire pressure readings to be displayed when using the INFO button to scroll through the DIC displays. Even with this feature programmed to be turned off, a low or high tire pressure condition will still cause the CHECK TIRE PRESSURE message to be displayed on the DIC. See DIC Warnings and Messages on page 3-60for more information. 3. To turn on the feature, press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. Programmable Modes Mode 1: ON Driver's Name SeVRecall If your vehicle has the optional memory package, you will have this feature. This feature allows individual driver's names to be displayed in the DIC when the ignition is turned to ON. This feature only works when the remote keyless entry transmitter is used to unlock the vehicle or when buttons 1 or 2 on the driver's door are pressed. See your dealer for assistance in programming this feature. Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following: 1. Enter FEATURE PROGRAMMING following the instructions listed previously. 2. Press the down arrow on the INFO button until TIRE PRESSURE DISPLAY appears on the DIC display. Exiting Feature Programming To exit FEATURE PROGRAMMING, press the INFO RESET or INFO button. 3-78