2007 Cadillac CTS-V Owner's Manual - Page 389

1. Open the trunk. See Trunk on page 100 for more information. 2. Remove the compact spare tire cover by turning the wing nut counterclockwise. 3. Remove the four convenience net wing nuts. 4. Pull the carpet back away from the body of the vehicle on the side with the burned out bulb. 5. Remove the two mounting screws from the lamp assembly. 6. Pull out the lamp assembly to expose the bulb sockets. 7. Turn the bulb socket one-quarter turn counterclockwise and pull the bulb socket out of the lamp reflector. 8. Pull the old bulb from the bulb socket keeping the bulb straight as you pull it out. 9. Install a new bulb. 10. Reverse the steps to reinstall the lamp assembly. Back-Up and License Plate Lamps A. Back-Up Lamps B. License Plate Lamps To replace a back-up or license plate bulb, do the following: 1. Open the trunk. See Trunk on page 100 for more information. 2. Remove the cloth cover on the trunk lid by pulling out the three push-pins located on the underside of the trunk lid. 3. Remove the eight mounting nuts from the underside of the trunk lid by turning the nuts counterclockwise. 389