2007 Cadillac DTS Owner's Manual - Page 166

Windshield Wipers You control the windshield wipers by turning the band with the wiper symbol on it. 1 (High Speed): For high-speed wiping, turn the band further, to the second solid band past the delay settings. 8 (Mist): Turn the band to mist for a single wiping cycle. Hold it there until the wipers start. Then let go. The wipers stop after one wipe. For more wipe cycles, hold the band longer on mist. 9 (Off): To stop the wipers, move the band to off. Clear ice and snow from the wiper blades before using them. If they are frozen to the windshield, carefully loosen or thaw them. If the blades become worn or damaged, replace with new blades or blade inserts. Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools. Clear away snow or ice to prevent an overload. Your vehicle has wiper-activated headlamps. After the windshield wipers have completed eight wipe cycles within four minutes, the headlamps automatically turn on. See Wiper Activated Headlamps on page 190 for more information. 6 (Delay): Turn the band to choose the delay time between wipe cycles. The wiper speed can be set for a long or short delay between wipes. The closer the band is set to the top of the lever, the shorter the delay. 6 (Low Speed): Turn the band away from you to the first solid band past the delay settings for steady wiping at low speed. 166