2007 Cadillac DTS Owner's Manual - Page 425

Notice: If you position the jack under the rocker molding and attempt to raise the vehicle, you could break the molding and/or cause other damage to your vehicle. Always position the jack so that when the jack head is raised, it will fit firmly in the notch located inboard from the rocker molding. 4. Turn the jack handle counterclockwise to lower the jack lift head until the jack fits under the vehicle. 6. Put the spare tire near you. 7. Raise the vehicle by turning the jack handle clockwise. Raise the vehicle far enough off the ground for the spare tire to fit under the vehicle. 8. Remove all wheel nuts and take off the flat tire. 5. Raise the jack until the metal flange fits firmly into the channel of the jack head. 425