2007 Cadillac XLR-V Owner's Manual - Page 153

9 (Off): This position turns the system off. R (On): This position turns the system on. S (Resume/Increase): Push the switch to this symbol to make the vehicle resume to a previously set speed or to increase the set speed when Adaptive Cruise Control is already active. T (Set/Decrease): Press this button to set the speed or to decrease the set speed when Adaptive Cruise Control is already active. {CAUTION: If you operate Adaptive Cruise Control without your Head-up Display (HUD) on and properly adjusted, your Adaptive Cruise Control settings will not be visible. You could forget your settings and be startled by Adaptive Cruise Control response and even lose control. Keep your HUD on and properly adjusted when using Adaptive Cruise Control. The set speed is selected by the driver. This is the speed you will travel if there is not a vehicle detected in your path. To set Adaptive Cruise Control, do the following: 1. Make sure the Head-Up Display (HUD) is on and properly adjusted. See Head-Up Display (HUD) on page 171 for more information. 2. Move the switch to on. Engaging Adaptive Cruise Control With the Set Button {CAUTION: If you leave your Adaptive Cruise Control switch on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the Adaptive Cruise Control switch off until you want to use cruise control. 153