2009 Cadillac Escalade Owner's Manual - Page 426

When pulling a trailer that, when loaded, will weigh more than 5,000 lbs (2 270 kg) be sure to use a properly mounted weight-distributing hitch and sway control of the proper size. This equipment is very important for proper vehicle loading and good handling when driving. Always use sway control if the trailer will weigh more than these limits. Ask a hitch dealer about sway controls. To reinstall the hitch cover: Hitch Cover The vehicle may have a hitch cover. To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Lift the lower edge of the cover about 45 degrees. 3. Pull the cover downward to disengage the upper attachments. 1. Hold the cover at a 45 degree angle to the vehicle and push the upper tabs in the hitch cover into the chrome slots in the fascia. 2. Move the bottom of the cover forward until the lower tabs line up with the lower fascia slots. 3. Snap the hitch cover into place by pushing the upper corners forward. 4. Turn the fasteners on the lower tabs 90 degrees clockwise to lock the cover in place. 5-50