2009 Cadillac STS-V Owner's Manual - Page 152

STORE DRIVER SETTINGS To store driver settings: 1. Adjust your settings for the driver's seat, the outside rearview mirrors, and the steering column to a comfortable driving position. 2. Enter the memory programming mode for your driver settings by following the instructions listed previously under "Entering the Driver Selection Submenu." 3. From the DRIVER SELECTION submenu, turn the tune/select knob to scroll to STORE DRIVER SETTINGS and press in the knob. Two beeps will sound to confirm that your driver settings are saved. 4. Set the HUD position, if your vehicle has this feature, the climate control temperature, fan speed and mode settings, the radio presets, tone, volume, playback mode (AM/FM, XM™, or CD), and compact disc position. Your memory settings are now programmed. Any changes that are made to the HUD, audio system, and climate controls while driving will be automatically stored when the ignition is turned off. 5. Repeat the procedure for a second driver by programming the other driver number. Entering the Driver Exit Settings Submenu To enter the memory programming mode for your exit settings: 1. The ignition must be either on, in ACCESSORY, or in RAP and the transmission in P (Park) or the vehicle speed less than 6 mph (9 km/h). 2. Press any button on the appropriate keyless access transmitter to identify yourself as Driver 1 or Driver 2. 3. Turn on the radio by pressing the power/ volume knob. 4. Press the CNFG radio button to enter the main menu of the radio. 5. Turn the tune/select knob and scroll to SETUP. 6. Press the tune/select knob to enter the SETUP menu. 7. Turn the tune/select knob and scroll to DRIVER EXIT SETTINGS. 8. Press the tune/select knob to enter the DRIVER EXIT SETTINGS submenu. The following items will appear: • RECALL EXIT SETTINGS • STORE EXIT SETTINGS 2-80