2009 Cadillac STS-V Owner's Manual - Page 428

Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: 3. Place the kit on the ground. 4. Remove the tire valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the air only hose (G) onto the tire valve stem by turning it clockwise until it is tight. 6. Plug the power plug (H) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Accessory Power Outlet(s) on page 3-46. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 7. Start the vehicle. The vehicle must be running while using the air compressor. 8. Turn the selector switch (A) clockwise to the Air Only position. 9. Press the on/off (B) button to turn the compressor on. The compressor will inflate the tire with air only. 10. Inflate the tire to the recommended inflation pressure using the pressure gage (C). The recommended inflation pressure can be found on the Tire and Loading Information label. See Inflation - Tire Pressure on page 5-64. Always do a safety check first. See If a Tire Goes Flat on page 5-84. 1. Remove the tire sealant and compressor kit from it's storage location. See Tire Sealant and Compressor Kit Storage on page 5-104. 2. Unwrap the air only hose (G) and the power plug (H). 5-102