2009 Cadillac STS-V Owner's Manual - Page 80

8. Remove the transmitter from the transmitter pocket and press K twice on each newly programmed transmitter to complete the process. 9. To program additional transmitters, repeat Step 6. Press Acc. on the ignition switch if programming is complete. Programming without a Recognized Transmitter This procedure requires three ten minutes cycles to complete the programming process. United States owners are permitted to program a new transmitter to their vehicle when a recognized transmitter is not available. The Canadian immobilizer standard requires that Canadian owners see their dealer/retailer for programming new transmitters when two recognized transmitters are not available. 1. The vehicle must be off. 6. Place the new transmitter into the transmitter pocket, located inside the center console storage area located between the driver and front passenger seats, with the transmitter buttons facing the front of the vehicle. 7. A beep sounds once programming in complete. The DIC displays READY FOR 3 or 4, or MAX # FOBS LEARNED. 2-8