2011 Cadillac Escalade Owner's Manual - Page 161

Instruments and Controls speed. The compass and outside air temperature will also be shown in the display. The temperature will be shown in °C or °F depending on the units selected. Press to display the oil life, units, side blind zone system on/off, tire pressure readings for vehicles with the Tire Pressure Monitor System (TPMS), compass zone setting, and compass recalibration. 5-27 Trip/Fuel Menu Items Fuel Range Press the trip/fuel button until FUEL RANGE displays. This display shows the approximate number of remaining kilometers (km) or miles (mi) the vehicle can be driven without refueling. The display will show LOW if the fuel level is low. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. This estimate will change if driving conditions change. For example, if driving in traffic and making frequent stops, this display may read one number, but if the vehicle is driven on a freeway, the number may change even though the same amount of fuel is in the fuel tank. This is because different driving conditions produce different fuel economies. Generally, freeway driving produces better fuel economy than city driving. Fuel range cannot be reset. 3 (Trip/Fuel): Odometer Press to scroll through the following menu items: Press the trip/fuel button until ODOMETER displays. This display shows the distance the vehicle has been driven in either kilometers (km) or miles (mi). To switch between English and metric measurements, see "Units" later in this section. Trip Odometer Press the trip/fuel button until TRIP displays. This display shows the current distance traveled in either kilometers (km) or miles (mi)) since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing the set/reset button while the trip odometer is displayed. T (Vehicle Information): U (Customization): Press to customize the feature settings on your vehicle. See Vehicle Personalization on page 5‑40 for more information. V (Set/Reset): Press to set or reset certain functions and to turn off or acknowledge messages on the DIC.