1996 Chevrolet Astro Owner's Manual - Page 225

1996 Chevrolet Astro Manual

Page 225 highlights

6. Put the heater duct over the engine cover studs. Push up on the duct gently until it snaps into place. 7. Reconnect the electrical connector for the cigarette lighter. 8. Grasp the bottom of the instrument panel extension and install the top into the groove first. Then,push the bottom of the extension intoplace. 9. Install the two nuts and two screws on the extension. Air Cleaner If you have the 4.3L engine (VIN Code W) with the rectangular air cleaner, you can change the air cleaner filterwithout removing the engine cover. Just lift the hood, unsnap both clips and remove the top. After changing the filter, snapboth clips to secure the air cleaner. Be sure air cleanerlid is correctly positioned to seal out dust and contaminants that are harmful to your engine. Make sure the fresh air hose is still attached after the filter is changed. Refer to the Maintenance Schedule to determine when to replacethe air filter. See "Scheduled Maintenance Services" in the Index. 6-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342

6.
Put the heater duct over the engine cover studs. Push up on the duct
gently
until
it
snaps into place.
7.
Reconnect the electrical connector
for the cigarette lighter.
8.
Grasp
the bottom of the instrument panel extension and install the top
into the groove first.
Then, push the bottom
of
the extension
intoplace.
9.
Install the two nuts and two screws on the
extension.
Air
Cleaner
If you have the
4.3L
engine
(VIN
Code
W)
with the rectangular air cleaner,
you
can change
the
air
cleaner
filter without removing the engine cover. Just
lift the hood, unsnap both clips and remove
the
top. After changing the
filter,
snap both clips to secure
the
air cleaner. Be sure
air
cleaner
lid is
correctly positioned to seal out
dust and contaminants that are harmful to
your engine.
Make
sure the fresh air hose is
still
attached after the filter
is
changed.
Refer to
the Maintenance Schedule to
determine when to
replace the air
filter.
See “Scheduled Maintenance Services”
in
the Index.
6-17