2000 Chevrolet Blazer Owner's Manual - Page 333

Taillamps 1. Open the endgate/liftgate. 2. Remove the two screws from the lamp assembly. 7. Put the socket into the assembly and turn the socket clockwise until it locks in place. 8. Install the lamp assembly. Install and tighten the screws. 9. Close the endgate/liftgate. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear or cracking. See "Wiper Blade Check" in Section 7 of this manual under Part B "Owner Checks and Services" for more information. See "Normal Maintenance Replacement Parts" in the Index for the proper type of replacement blade. 3. Pull the assembly away from the vehicle. 4. Turn the socket counterclockwise to remove it. Push the tab in while you turn the socket counterclockwise. 5. Holding the base of the bulb, pull the bulb straight out of the socket. 6. Push the new bulb straight into the socket until it clicks. NOTICE: Use care when removing or installing a blade assembly. Accidental bumping can cause the arm to fall back and strike the windshield. 6-39