2000 Chevrolet Venture Owner's Manual - Page 18

Second Row Safety Belt Stowage If your vehicle has seats in the third row, there is a sleeve on the second row outside safety belt to store the safety belt while entering and exiting the third row of the vehicle. If your vehicle has a split bench seat in the second row, follow this procedure: 1. Pull the belt out and slide the sleeve along the belt until it reaches the patch of VelcroR on the headliner. 2. Press the sleeve against the Velcro patch to secure it in place. 3. Use the clip on the safety belt to secure the belt after it is disconnected from the mini-buckle. When removing the split second row bench seat, secure the loose end of the safety belt in this clip. This will keep the safety belt from dangling and possibly striking something. Do not have the second row outside safety belt stored if someone is sitting in the second row outside position. To release the second row outside safety belt, just pull the sleeve away from the Velcro patch and use the safety belt as usual. The sleeve should slide freely when not in use. Floor Seat Pin Diagram When you put the seats back in the vehicle, be sure to follow the label on the back of the seat for proper location. Follow the diagram above when the text in this manual tells you what sets of floor cups to use for each seat. 1-6