2001 Chevrolet Prizm Owner's Manual - Page 260

Rear Combination Lamps The combination lamp assembly includes the taillamp/stoplamp, turn signal and sidemarker bulbs. To replace any of the rear combination lamps: 1. Open the trunk. 2. Remove the three plastic screws located on the access panel. 3. Pull back the access panel. 4. Turn the bulb socket counterclockwise and pull it out. 5. To remove the turn signal or tail/stop lamps, turn the bulb socket in, to remove it from the housing. Then push in and turn the bulb counterclockwise. 6. To remove the sidemarker socket, turn it counterclockwise to remove the housing. Then pull the bulb straight out from the socket. 7. Reverse the steps to install a new bulb. A. Back-Up Lamps B. Turn Signal Lamps C. Taillamp/Stoplamp D. Rear Sidemarker 6-37