2004 Chevrolet Aveo Owner's Manual - Page 235

Sidemarker Lamps (Rear) 1. Reach into the inside of the rear bumper and locate the rear sidemarker bulb socket. 2. Turn the socket counterclockwise. 3. Pull the socket out of the rear bumper. Taillamps, Turn Signal, Stoplamps and Back-up Lamps 4. Pull the old bulb straight out of the socket. 5. Install the new bulb by pressing it straight into the socket. 6. Reverse Steps 1 through 3 to install the socket. 1. Open the trunk or liftgate. 2. Remove the two screws and the lamp assembly. 3. Remove the bulb socket by turning it counterclockwise. 4. Remove the bulb from the socket by pressing the bulb and turning it counterclockwise. 5. Install the appropriate bulb into the socket. 6. Replace the bulb socket into the lamp housing. Twist the bulb socket clockwise to secure. 7. Reverse Steps 1 through 2 to install the lamp housing. 5-49