2005 Chevrolet Tahoe Owner's Manual - Page 464
2005 Chevrolet Tahoe Manual
Page 464 highlights
To store the tools, follow these procedures: For Tahoe, do the following: 1. Put the tool kit, with the jack tools, in the tool bag and place in the retaining clip above the jack. 2. Tighten down with the wing nut. 3. Assemble the wheel chocks and bottle jack together with the wing nut and retaining hook. 4. Position behind the jack storage cover in the left rear side panel and tighten, adjusting clockwise until the jack is secured tight in the mounting bracket. Be sure to position the holes in the base of the jack onto the pin in the mounting bracket. For Suburban, do the following: 1. Return the tool kit, with the jack tools, to the tool bag. 7. Make sure the tire is stored securely. Push, pull, (A) and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable. 8. Reinstall the spare tire lock (if equipped). 2. Assemble wheel chocks and bottle jack together with the wing nut and retaining hook. 3. Position under the jack storage tray in the left rear side panel below the wheelbase and tighten, adjusting clockwise until the jack is secured tight in the mounting bracket. Be sure to position the holes in the base of the jack onto the pin in the mounting bracket. 5-98