2006 Chevrolet Express Van Owner's Manual - Page 335

2. Turn the wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 3. Connect the jack handle (C) and jack handle extension (B) together and press the retention clip (arrow) so it engages. 5. Place the jack under the vehicle, ahead of the rear bumper. Position the center lift point of the jack under the center of the spare tire and turn the handle clockwise to raise the jack until it lifts the secondary latch spring. 6. Keep raising the jack until the spare tire stops moving upward and is held firmly in place. This lets you know that the secondary latch has released. The spare tire is now balancing on the jack. 4. Attach the jack handle/jack handle extension to the jack. With the UP mark facing you, slide the ratchet onto the end of the jack handle extension. The set-up should look like the picture above. 7. Lower the jack by turning the ratchet counterclockwise. Keep lowering the jack until the spare tire slides off the jack or is hanging by the cable. 5-81