2006 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 363

Truck-Camper Loading Information Notice: Installing a truck-camper to a vehicle that is equipped with the SS trim package could damage the vehicle. Do not install a truck-camper on a vehicle equipped with the SS trim package. A vehicle specific Truck-Camper Loading information label is attached to the inside of your vehicle's glove box. This label will tell you if your vehicle can carry a slide-in camper, how much of a load your vehicle can carry, and how to correctly spread out the load. Also, it will help you match the right slide-in camper to your vehicle. When you carry a slide-in camper, the total cargo load of your vehicle is the weight of the camper, plus the following: The total cargo load must not be more than your vehicle's CWR. Refer to the Truck-Camper Loading Information label in the glove box for dimensions A and B as shown in the following illustration. • Everything else added to the camper after it left the factory • Everything in the camper • All the people inside The Cargo Weight Rating (CWR) is the maximum weight of the load your vehicle can carry. It does not include the weight of the people inside. But, you can figure about 150 lbs (68 kg) for each seat. Use the rear edge of the load floor for measurement purposes. The recommended location for the cargo center of gravity is at point C for the CWR. It is the point where the mass of a body is concentrated and, if suspended at that point, would balance the front and rear. 4-59