2006 Chevrolet Silverado 3500 Pickup Owner's Manual - Page 173
2006 Chevrolet Silverado 3500 Pickup Manual
Page 173 highlights
Vehicle Personalization In addition to the following features, your vehicle may also have features that can be programmed through the Driver Information Center (DIC). See DIC Vehicle Customization on page 3-64 for more information. 2. Adjust the driver's seat, including the seatback recliner and lumbar, and both outside mirrors to your preference. 3. Press and hold the 1 or 2 button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. To recall a memory position, do one of the following: Memory Seat If your vehicle has this feature, the controls for the memory function are located on the driver's door. • If you have an automatic transmission, press and release the desired button 1 or 2 while the vehicle is in PARK (P). A single chime will sound and the memory position will be recalled. If the vehicle is not in PARK (P), the memory position will not be recalled. • If you have a manual transmission, press and These buttons are used to program and recall memory settings for the driver's seat and both the driver's and passenger's outside mirrors. The settings for these features can be saved for up to two drivers. To store the memory settings, do the following: 1. If you have an automatic transmission, place the vehicle in PARK (P). If you have a manual transmission, set the parking brake. release the desired button 1 or 2 while the parking brake is set. A single chime will sound and the memory position will be recalled. If the parking brake is not set, the memory position will not be recalled. To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls. 2-79