2007 Chevrolet Silverado 2500 Pickup Owner's Manual - Page 70

Crew Cab Models 1. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if your vehicle has one. Refer to the child restraint instructions and the following steps: 1.1. To access the top tether anchors, raise the seat cushion by pulling up on the strap loop at the rear of the seat cushion and fold the seat cushion forward. Then fold the seatback forward. See Rear Seat Operation (Extended Cab) on page 19 or Rear Seat Operation (Crew Cab) on page 20 for additional information. 1.2. Place the child restraint in the vehicle, near the seating position that you are using. 1.3. Route the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a head restraint and you are using a single tether, route the tether over the seatback. If the position you are using does not have a head restraint and you are using a dual tether, route the tether over the seatback. 70