2008 Chevrolet Cobalt Owner's Manual - Page 125

Turn Signal/Multifunction Lever Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. The lever on the left side of the steering column includes the following: • GTurn and Lane-Change Signals. See Turn and Lane-Change Signals on page 3-7. • 53Headlamp High/Low-Beam Changer. See Headlamp High/Low-Beam Changer on page 3-8. To signal a lane change, raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrows flash rapidly, a signal bulb may be burned out and other drivers will not see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows do not go on at all when you signal a turn, check the fuse. See Fuses and Circuit Breakers on page 5-106. 3-7 • Flash-to-Pass. See Flash-to-Pass on page 3-8. • OExterior Lamp Control. See Headlamps on page 3-12.