2008 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 456
2008 Chevrolet Silverado 1500 Pickup Manual
Page 456 highlights
6. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one. Negative (−) will go to a heavy, unpainted metal engine part or to a remote negative (−) terminal if the vehicle has one. Do not connect positive (+) to negative (−) or you will get a short that would damage the battery and maybe other parts too. And do not connect the negative (−) cable to the negative (−) terminal on the dead battery because this can cause sparks. 7. Connect the red positive (+) cable to the positive (+) terminal of the vehicle with the dead battery. 8. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 9. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. 10. Connect the other end of the negative (−) cable to a heavy, unpainted metal engine part or to the remote negative (−) terminal, on the vehicle with the dead battery. 11. Start the vehicle with the good battery and run the engine for a while. 12. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. 5.3L engine (4.3L, 4.8L and 6.0L similar), 5-50