2009 Chevrolet Malibu Owner's Manual - Page 191

• To scan preset stations in the selected band, press and hold ©SEEK for four seconds until a double beep sounds. The radio goes to a stored preset, plays for a few seconds, then goes to the next stored preset. Press ©SEEK again to stop scanning preset stations. • To scan preset stations in the selected band, press and hold ¨SEEK for four seconds until a double beep sounds. The radio goes to a stored preset, plays for a few seconds, then goes to the next stored preset. Press ¨SEEK again to stop scanning preset stations. ¨ SEEK: Press to seek or scan stations with a strong signal in the selected band. • To seek stations, press and release ¨SEEK to go to the next station and stay there. 4 (Information): For vehicles with the Radio with CD (Base), press to switch the display between the radio station frequency and the time. While the ignition is off, press 4 to display the time. • To scan stations, press and hold ¨SEEK for a few seconds until the radio beeps once. The radio goes to a station, plays for a few seconds, then goes to the next station. Press ¨SEEK again to stop scanning. For vehicles with XM, MP3, WMA, or RDS features, press 4 to display additional text information related to the current FM-RDS or XM station; or CD, MP3, WMA song. Song title information will be displayed on the top line of the display while the artist information will be displayed on the bottom line, it the information is available during XM, CD, MP3, or WMA playback. When information is not available, "No Info" displays. 3-61