2009 Chevrolet Suburban 2500 Owner's Manual - Page 181

The garage door opener receiver (motor head unit) could also have a row of dip switches that can be used when programming the Universal Home Remote. If the total number of switches on the motor head and hand held transmitter are different, or if the dip switch settings are different, use the dip switch settings on the motor head unit to program the Universal Home Remote. The motor head dip switch settings can also be used when the original hand held transmitter is not available. Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar. The switch positions on the hand-held transmitter could be labeled, as follows: • A switch in the up position could be labeled as "Up or "On." Example of Eight Dip Switches with Two Positions • A switch in the down position could be labeled as "Down or "Off." • A switch in the middle position could be labeled as "Middle," "0," or "Neutral." 2-75