2009 Chevrolet Suburban Owner's Manual - Page 458

6. Press a new bulb into the bulb socket and insert it into the taillamp assembly. Turn the bulb socket clockwise into the taillamp assembly until it clicks. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If this is not done the taillamp assembly cannot be correctly installed. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. License Plate Lamp Replacement Bulbs If your vehicle is a Two-mode Hybrid, see the Two-mode Hybrid manual for more information. Exterior Lamp License Plate Lamp Rear Turn Signal Lamp, Taillamp, and Stoplamp Bulb Number 168 3047 For replacement bulbs not listed here, contact your dealer/retailer. 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp forward through the molding opening. 5-58