2011 Chevrolet Silverado 2500 HD Regular Cab Owner's Manual - Page 258
2011 Chevrolet Silverado 2500 HD Regular Cab Manual
Page 258 highlights
7-40 Infotainment System Audio Output Audio from the DVD player or auxiliary inputs can be heard through the following possible sources: ... See "Using the Auxiliary Input Jack" under Auxiliary Devices on page 7‑31 for more information about changing the source. Changing the RSE Video Screen Settings The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from the on screen setup menu. To change any feature: 1. Press the z (display menu) button on the remote control. 2. Use the remote control n, q, p, o (navigation) arrows and the r (enter) button to use the setup menu. 3. Press the z button again to remove the setup menu from the screen. Wireless headphones Vehicle speakers Vehicle‐wired headphone jacks on the RSA system, if the vehicle has this feature. When a device is connected to the A/V jacks, or the radio's auxiliary input jack if the vehicle has this feature, the rear seat passengers are able to hear audio from the auxiliary device through the wireless or wired headphones. The front seat passengers are able to listen to playback from this device through the vehicle speakers by selecting AUX as the source on the radio. The RSE system always transmits the audio signal to the wireless headphones, if there is audio available. See "Headphones" earlier in this section for more information. The DVD player is capable of outputting audio to the wired headphone jacks on the RSA system, if the vehicle has this feature. The DVD player can be selected as an audio source on the RSA system. See Rear Seat Audio (RSA) System on page 7‑46 for more information. Video Screen The video screen is located in the overhead console. To use the video screen: 1. Push the release button located on the overhead console. 2. Move the screen to the desired position. When the video screen is not in use, push it up into its locked position.