2010 Chrysler 300 Owner Manual - Page 52

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 6. To release the belt, push the red button on the buckle. above the webbing to release the anchorage, then move it The belt will automatically retract to its stowed position. up or down to the position that fits you best. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. 2 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.). Adjusting Upper Shoulder Belt As a guide, if you are shorter than average you will Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt prefer a lower position, and if you are taller than average can be adjusted upward or downward to position the belt away from your neck. Push and fully depress the button