2010 Chrysler PT Cruiser Owner Manual - Page 30
2010 Chrysler PT Cruiser Manual
Page 30 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 For vehicles not equipped with the EVIC, the Auto Lock 3. The shift lever is in NEUTRAL or PARK. can be enabled or disabled by performing the following 4. The driver door is opened. procedure: 5. The doors were not previously unlocked. 1. Close all doors and place the key in the ignition. 6. The vehicle speed is 0 mph (0 km/h). 2. Cycle the ignition switch between LOCK and ON, and back to LOCK four times, ending up in the LOCK The Auto Unlock feature can be enabled or disabled. Refer to "Electronic Vehicle Information Center (EVIC) - position. If Equipped/Personal Settings (Customer-Programmable 3. Press the power door LOCK switch to lock the doors. Features)" in "Understanding Your Instrument Panel" for 4. A single chime will indicate the completion of the further information. programming. For vehicles not equipped with the EVIC, the Auto Unlock Feature can be enabled or disabled by performing Auto Unlock - If Equipped The doors will unlock automatically on vehicles with the following procedure: power door locks if: 1. Close all doors and place the key in the ignition. 1. The Auto Unlock feature is enabled. 2. Cycle the ignition switch between LOCK and ON, and 2. The shift lever was in gear and the vehicle speed back to LOCK four times, ending up in the LOCK returned to 0 mph (0 km/h). position. 2