2012 Chrysler 300 User Guide - Page 80

WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The limited-use spare tires are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than 60 mph (100 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly. Replace (or repair) the original tire at the first opportunity and reinstall it on your vehicle. Failure to do so could result in loss of vehicle control. TIREFIT KIT 1 • Small punctures up to 4 in (6 mm) in the tire tread can be sealed with TIREFIT. Foreign objects (e.g., screws or nails) should not be removed from the tire. TIREFIT can be used in outside temperatures down to approximately -4°F (-20°C). • This kit will provide a temporary tire seal, allowing you to drive your vehicle up to 100 miles (160 km) with a maximum speed of 55 mph (88 km/h). TIREFIT Storage • The TIREFIT kit is located in the trunk. TIREFIT Kit Components And Operation 1. Sealant Bottle 2. Deflation Button 3. Pressure Gauge 4. Power Button Using The Mode Select Knob And Hoses 5. Mode Select Knob 6. Sealant Hose (Clear) 7. Air Pump Hose (Black) 8. Power Plug • Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode • Turn the Mode Select Knob (5) to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode. 78