2013 Chrysler Town & Country Owner's Manual - Page 344

342 UNDERSTANDING YOUR INSTRUMENT PANEL Compass / Temperature Display The compass readings indicate the direction the vehicle is facing. The EVIC will display one of eight compass NOTE: A good calibration requires a level surface and an readings and the outside temperature. environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to Manual Compass Calibration be driven several minutes before the updated temperaIf the compass appears erratic and the CAL indicator ture is displayed. Engine temperature can also affect the does not appear in the EVIC display, you must put the displayed temperature; therefore, temperature readings compass into the Calibration Mode manually, as follows: are not updated when the vehicle is not moving. 1. Turn ON the ignition switch. Automatic Compass Calibration This compass is self-calibrating, which eliminates the 2. Press the UP or DOWN button until the System Setup (Customer-Programmable Features) menu is reached, need to manually reset the compass. When the vehicle is then press the SELECT button. new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated. You may 3. Press the DOWN button until "Calibrate Compass" is also calibrate the compass by completing one or more displayed in the EVIC then press and release the 360-degree turns (in an area free from large metal or SELECT button. metallic objects) until the CAL indicator displayed in the EVIC turns off. The compass will now function normally.