2005 Dodge Dakota Owner Manual - Page 19
2005 Dodge Dakota Manual
Page 19 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • The doors of the vehicle must be locked automatically by the Automatic Door Lock feature. • The vehicle is in P (Park) and the ignition switch is in any key position. This feature will not operate if any of the conditions above are not met or following has occurred: • Any manual operation of a door lock switch has occurred. NOTE: This customer programmable feature is enabled when your vehicle is shipped from the assembly plant. Auto Unlock Feature Programming Customer Programming sequence to disable or enable: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may be confusing during this programming procedure). 3. Insert the key into the ignition. 4. Within 10 seconds, cycle the key from the OFF position to the ON position four times ending in the ON position (do not start the engine). 5. Within 30 seconds, press the driver's door lock switch in the UNLOCK direction. 6. A single chime will sound to indicate the feature has been changed. 7. To reactivate the feature, repeat the above steps. 8. If a chime is not heard, program mode was canceled before the feature could be changed. If necessary repeat the above procedure. 2