2009 Dodge Avenger Owner Manual - Page 147
2009 Dodge Avenger Manual
Page 147 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 To Activate Push and release the ON/OFF button located on the end of the Electronic Speed Control lever. The CRUISE indicator in the instrument cluster will illuminate. To turn the system off, push and release the ON/OFF button a second time. The CRUISE indicator will turn off. Be sure to turn the system off when not in use. NOTE: The Electronic Speed Control system will automatically turn off when the ignition is turned OFF. To Set At A Desired Speed When the vehicle reaches the speed desired, press down on the lever and release SET DECEL. Release the accelerator and the vehicle will operate at the selected speed. NOTE: • The vehicle must be traveling at least 25 mph (40 km/h) for the Electronic Speed Control to set. • The vehicle should be traveling at a steady speed and on level ground before pressing the lever SET DECEL. To Deactivate A soft tap on the brake pedal, or pulling the Electronic Speed Control lever toward you (CANCEL), or normal brake pressure while slowing the vehicle will deactivate the Electronic Speed Control without erasing the set speed from memory. Pressing the ON/OFF button or turning off the ignition erases the set speed from memory. 3 WARNING! Leaving the Electronic Speed Control when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it.