2009 Dodge Ram 2500 Pickup Owner Manual - Page 403
2009 Dodge Ram 2500 Pickup Manual
Page 403 highlights
STARTING AND OPERATING 401 11. Repeat steps 9 and 10 with the transmission in DRIVE. 12. Shut the engine OFF and place ignition key in the unlocked OFF position. 13. Shift the transmission into PARK. 14. Apply the parking brake. 15. Attach the vehicle to the tow vehicle with the tow bar. 16. Release the parking brake. NOTE: • Steps 1 through 5 are requirements that must be met prior to depressing the NEUTRAL selection button, and must continue to be met until the four seconds elapses and the shift has been completed. If any of these requirements (with the exception of 3 - Key ON) are not met prior to depressing the NEUTRAL button or are no longer met during the four second timer, then the NEUTRAL indicator light will flash continuously until all requirements are met or until the NEUTRAL button is released. • The ignition key must be ON for a shift to take place and for the position indicator lights to be operable. If the key in not ON, the shift will not take place and no position indicator lights will be on or flashing. • Flashing NEUTRAL position indicator light indicates that shift requirements have not been met. 5 CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL and the engine running. With the transfer case in NEUTRAL, ensure that the engine is OFF prior to shifting the transmission into PARK.