2011 Dodge Caliber Owner Manual - Page 52

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Insert the mini-latch plate into the slot provided in the trim panel. 4. Continue to slide the latch plate up until it clears the folded webbing. Seat Belts In Passenger Seating Positions The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) Lap/Shoulder Belt Untwisting Procedure which are used to secure a child restraint system. For Use the following procedure to untwist a twisted lap/ additional information, refer to "Installing Child Reshoulder belt. straints Using The Vehicle Seat Belt" under the "Child Restraints" section. The chart below defines the type of 1. Position the latch plate as close as possible to the feature for each seating position. anchor point. Driver Center Passenger 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, First Row N/A N/A ALR grasp and twist the belt webbing 180 degrees to create a Second Row ALR ALR ALR fold that begins immediately above the latch plate. Third Row N/A N/A ALR 3. Slide the latch plate upward over the folded webbing. • N/A - Not Applicable The folded webbing must enter the slot at the top of the latch plate. • ALR - Automatic Locking Retractor