2012 Dodge Avenger Owner Manual - Page 454

452 MAINTAINING YOUR VEHICLE 1. Clean with a wet, soft rag. A mild soap solution may Cleaning Center Console Cupholders be used, but do not use high alcohol content or abrasive Removal cleaners. If soap is used, wipe clean with a clean damp Grab the rubber portion of the cupholder and lift rag. upward. 2. Dry with a soft cloth. Cleaning Seat Belt Maintenance Soak the rubber cupholder liner in a mixture of medium Do not bleach, dye, or clean the belts with chemical hot tap water and one teaspoon of mild liquid dish soap. solvents or abrasive cleaners. This will weaken the fabric. Let soak for approximately one hour. After one hour pull the liner from the water and dip it back into the water Sun damage can also weaken the fabric. about six times. This will loosen any remaining debris. If the belts need cleaning, use a mild soap solution or Rinse the liner thoroughly under warm running water. lukewarm water. Do not remove the belts from the car to Shake the excess water from the liner and dry the outer wash them. Dry with a soft cloth. surfaces with a clean soft cloth. Replace the belts if they appear frayed or worn or if the Installation buckles do not work properly. Align the liner in the cupholder and press down firmly.